Omron E2E-X10MB1T12-R 2M Inductive Proximity Sensor
| Feature | Value |
|---|---|
| Sensor Type | Inductive proximity sensor |
| Series | E2E NEXT |
| Size | M12 |
| Mounting Type | Non-flush |
| Sensing Distance | 10 mm |
| Output Type | IO-Link, PNP |
| Operation Mode | NO |
| Connection Method | Cable |
| Cable Specification | PVC, oil-resistant |
| Cable Length | 2 m |
| Feature | Flexible cable |
| IO-Link Baud Rate | COM3, 230.4 kbps |
| Housing Material | Nickel-plated brass |
| Overall Length | 47.1 mm |
| Thread Length | 26 mm |
| Protection Rating | IP67, IP67G, IP69K |
Omron E2E-X10MB1T12-R 2M Technical Description
The Omron E2E-X10MB1T12-R 2M Inductive Proximity Sensor is an M12 non-flush inductive sensor equipped with a 2 m flexible cable. It is intended for metal detection tasks where cable movement, routing flexibility, or repeated machine motion is a design factor.
The sensor combines a 10 mm sensing distance, PNP normally open output, IO-Link COM3 communication, and a nickel-plated brass housing. The Omron E2E-X10MB1T12-R 2M Inductive Proximity Sensor is often selected for dynamic machine sections where fixed connector mounting may not be the preferred approach.
Working Principle
The device generates an electromagnetic field from its sensing face. When a metal object approaches, the induced eddy currents modify the internal oscillator state, and the electronics change the output signal. This method allows reliable metal presence detection without direct mechanical contact.
IO-Link support adds a communication layer for device identification, status monitoring, and parameter handling through compatible automation hardware.
Usage Areas
This sensor can be used for end-position detection on moving actuators, metal carrier confirmation, conveyor equipment feedback, robotic auxiliary axes, and automated transfer units. The 2 m cable supports installations where the sensor must be routed directly to a junction box or control enclosure.
Industrial Applications
In robotic handling, the flexible cable can support applications where cable movement is part of the equipment design. In automotive welding fixtures, the sensor can confirm clamp or locating pin status. In logistics equipment, it may detect pallet stops or metal guide components. In packaging machinery, it can monitor mechanical timing elements and metal reference parts.
Advantages
- Flexible 2 m cable for moving or routed installations
- 10 mm sensing range in a compact M12 format
- IO-Link communication for device-level data
- Oil-resistant PVC cable for industrial environments
- IP67, IP67G, and IP69K ratings
- Nickel-plated brass construction
Selection Considerations
Engineers should review bending conditions, cable routing, target geometry, surrounding metal, and available controller inputs. Since this is a non-flush model, the mounting bracket should provide appropriate clearance around the sensing face. The cable should be secured to prevent mechanical stress at the sensor exit point.
Omron E2E-X10MB1T12-R 2M Related Omron Sensor Series
For additional sensing families, review Omron sensor series.
Frequently Asked Questions
What is the cable length?
The sensor has a 2 m cable.
Is the cable suitable for flexible routing?
Yes. The product information lists a flexible cable feature.
What does the sensor detect?
It detects metallic targets using inductive sensing.
What is the sensing distance?
The rated sensing distance is 10 mm.
Does it support IO-Link?
Yes. It supports IO-Link communication at COM3 speed.
What output mode is used?
It uses PNP output with normally open operation.
Where is this model commonly applied?
It is suitable for moving machine sections, robotic fixtures, conveyors, and metal position feedback applications.
What should be checked during maintenance?
Cable condition, mounting tightness, target alignment, contamination around the sensing face, and controller diagnostics should be reviewed.