Omron E2E-X10MB1T18 10M Inductive Proximity Sensor
| Feature | Value |
|---|---|
| Sensor Type | Inductive proximity sensor |
| Series | E2E NEXT |
| Size | M18 |
| Mounting Type | Non-flush |
| Sensing Distance | 10 mm |
| Output Type | IO-Link, PNP |
| Operation Mode | NO |
| Connection Method | Cable |
| Cable Length | 10 m |
| IO-Link Baud Rate | COM3, 230.4 kbps |
| Housing Material | Nickel-plated brass |
| Protection Rating | IP67, IP67G, IP69K |
Technical Description
The Omron E2E-X10MB1T18 10M Inductive Proximity Sensor is an M18 non-flush inductive sensor with a 10 m cable for installations requiring longer cable routing from the sensing point to the control cabinet or junction field box. Its M18 body provides a mechanically robust mounting format for industrial machines.
The sensor detects metallic targets at a rated distance of 10 mm and uses PNP normally open output with IO-Link COM3 communication. The Omron E2E-X10MB1T18 10M Inductive Proximity Sensor is relevant for large machine layouts, extended conveyor systems, and distributed automation equipment.
Working Principle
The sensing head produces an electromagnetic field. When a metal target enters this field, the sensor electronics detect the disturbance caused by eddy currents and switch the output. The non-contact principle helps reduce mechanical wear and allows repeated operation in high-cycle machinery.
With IO-Link, the device can exchange additional data with compatible automation systems, supporting structured commissioning and easier diagnostics compared with a purely discrete signal.
Usage Areas
The 10 m cable length is useful in applications where the sensor is mounted far from the input module. Typical use cases include long conveyor sections, bulk material handling machinery, industrial washing systems, automated storage mechanisms, and equipment with separated control panels.
Industrial Applications
In material handling, the sensor can detect metal carriers along a conveyor. In warehouse automation, it may confirm shuttle or transfer position. In heavy machinery, it can monitor mechanical stops or guards. In processing lines, it can provide position feedback where field wiring must reach remote junction points.
Advantages
- 10 m cable for extended installation routes
- M18 threaded housing for stable mounting
- 10 mm sensing distance for metallic targets
- IO-Link COM3 communication
- PNP normally open output
- Nickel-plated brass housing
- IP67, IP67G, and IP69K protection ratings
Selection Considerations
For long cable installations, engineers should evaluate routing paths, cable protection, electrical noise exposure, and connection points. The M18 housing requires suitable mechanical space, and the non-flush sensing face must be mounted with proper clearance from nearby metal structures.
Related Omron Sensor Series
For additional sensor alternatives and industrial device families, see Omron sensor products.
Frequently Asked Questions
Why choose the 10 m cable version?
It is useful when the sensor is located far from the control cabinet or junction box.
What is the body size?
The sensor uses an M18 cylindrical housing.
What is the sensing distance?
The rated sensing distance is 10 mm.
What output type does it provide?
It provides IO-Link and PNP output with normally open operation.
Can it be used for non-metal targets?
No. It is intended for metallic target detection.
What protection rating is listed?
The product information lists IP67, IP67G, and IP69K.
Where is this sensor practical?
It is practical in conveyor lines, remote machine sections, storage systems, and material handling equipment.
What installation issue is important with long cables?
Cable routing should be protected from abrasion, crushing, excessive bending, and electrical interference.