Omron S8FS-C02524J 25W 24VDC 1.1A Switch Mode Power Supply
The Omron S8FS-C02524J is a 25 W switch mode power supply developed to deliver a regulated 24 VDC output in industrial machinery and electrical control equipment. Its rated output current of 1.1 A supports compatible controllers, sensors, relays, indicators, and other low-power loads. The forward-facing terminal block provides accessible connections for panel wiring and maintenance. Contact Emaconn for current pricing, availability, delivery information, and product selection assistance.
Power Supply Selection for 24 VDC Control Circuits
A correctly selected power supply helps maintain consistent voltage across the connected control circuit. Voltage instability or insufficient current capacity can cause unexpected controller resets, unreliable relay operation, and intermittent sensor faults. This model is intended for applications whose continuous and temporary power requirements remain within its rated capacity.
The 25 W output rating provides more capacity than the smaller 15 W model in the S8FS-C family. It may therefore be appropriate for compact systems containing several low-power devices. Engineers must still calculate the complete load profile and include a suitable operating margin rather than selecting the unit only by its nominal voltage.
Electrical Ratings and Functional Details
- Rated output power: 25 W
- Output voltage: 24 VDC
- Rated output current: 1.1 A
- AC input: Single-phase 85 to 264 VAC
- DC input: 120 to 370 VDC under specified conditions
- Output adjustment: Approximately -10% to +10%
- Terminal direction: Terminal block facing forward
- Status indication: Green output LED
- Cooling: Fanless natural air cooling
- Operating temperature: -20 to 60°C with required derating
The wide AC input range allows the product to be considered for equipment used across different mains environments. When the unit is supplied from a DC source, installers must observe the specified input polarity and review the manufacturer’s conditions concerning derating and safety-standard applicability.
Where Can This Power Supply Be Used?
The Omron S8FS-C02524J can be evaluated for compact automation cabinets, packaging machines, material-handling equipment, production monitoring systems, test installations, and OEM machine assemblies. It is particularly relevant where a stable 24 VDC source is required for a group of control components with moderate combined current demand.
Potential loads include industrial relays, sensors, signalling devices, interface components, and compact controllers. Suitability depends on the actual electrical demand of the connected equipment. Devices with inductive loads or high startup current require additional engineering attention because their temporary consumption may exceed the normal operating value.
Overload and Overvoltage Protection
The power supply includes overload protection with automatic reset. If the output is overloaded, the connected circuit and its current demand should be checked before returning the machine to regular service. Continuous or repeated overload operation can indicate incorrect capacity selection or a fault within the load circuit.
Overvoltage protection shuts down the output when the protection threshold is reached. Restoring operation requires the input power to be switched off and then applied again. External circuit protection remains necessary because the built-in functions do not replace appropriately rated fuses, circuit breakers, or protective measures required by the machine design.
Omron S8FS-C02524J Series and Backup Operation
Up to two compatible power supplies may be used in series when suitable external diodes are installed. Standard parallel operation is not permitted. Backup operation can be considered with external diodes, but the complete arrangement must be designed according to the manufacturer’s technical instructions.
For systems requiring redundancy or increased availability, engineers should assess whether a dedicated redundancy solution would provide more appropriate monitoring and fault management. The intended operating method should be confirmed before ordering the product and associated protection components.
Installation and Panel Integration
The forward-facing terminals can simplify access during initial wiring, testing, and maintenance. The installation must allow sufficient clearance for conductors and ventilation. The specified mounting position should be followed, and heat-producing equipment should not restrict airflow around the power supply.
Ambient temperature and input voltage affect the usable output capacity. Derating requirements must therefore be reviewed when the product is installed in a warm enclosure or operated near the limits of its input range. During commissioning, technicians should verify terminal tightness, protective earthing, output polarity, actual output voltage, and current demand under operating conditions.
Points to Confirm Before Ordering
Buyers should confirm the full part number, rated power, output voltage, maximum current, terminal orientation, input source, physical dimensions, and required approvals. The J suffix is important because it identifies the forward-facing terminal block configuration. Another version from the same family may have a different mounting or terminal arrangement.
If the expected continuous demand is close to 1.1 A, selecting a higher-capacity model may provide a better operating margin. Future expansion should also be considered because adding sensors, relays, or communication devices can increase the total load after commissioning.
Industrial Procurement Support from Emaconn
Emaconn supports international customers with quotation preparation, current price requests, availability checks, estimated lead times, and technical model evaluation. Procurement assistance can be provided for individual replacements, preventive maintenance stock, machine-building projects, and volume orders.
To receive an accurate quotation, provide the complete model number, required quantity, delivery destination, and requested schedule. Application information can also be shared when help is needed to compare power ratings or identify a possible alternative. Visit the Omron industrial automation product range to review related sourcing opportunities.
Conclusion
The Omron S8FS-C02524J is a 25 W industrial switch mode power supply with a 24 VDC, 1.1 A rated output and forward-facing terminals. It can support suitable compact automation systems, control panels, and OEM equipment when the connected load and environmental conditions remain within the specified limits.
Selection should be based on the complete load calculation, startup demand, input source, panel temperature, terminal arrangement, and required certifications. Contact Emaconn to confirm suitability and request current stock, pricing, or project quotation information.
Omron S8FS-C02524J Frequently Asked Questions
What output does the Omron S8FS-C02524J provide?
It provides a rated 24 VDC output with a maximum rated current of 1.1 A and a total power rating of 25 W.
Is this model suitable for industrial control panels?
Yes, it can be considered for compatible control panels when the electrical load, mounting conditions, and environmental requirements are verified.
Why is load calculation important?
Load calculation confirms that the continuous demand and temporary current peaks remain within the available output capacity.
Does the power supply accept different AC voltages?
Yes. Its single-phase AC input range is 85 to 264 VAC, supporting various industrial mains supplies.
What is the purpose of the output voltage adjuster?
It allows limited output adjustment, generally from approximately -10% to +10%. The voltage must be measured after adjustment.
How does overload protection operate?
The overload protection resets automatically after the overload condition is removed, although the source of the fault should be investigated.
Does this model use a cooling fan?
No. It uses natural air cooling, so the installation must provide suitable airflow and operating clearance.
What information is needed for a price request?
Provide the exact part number, quantity, delivery country, and preferred delivery schedule when requesting current pricing.
Can the expected lead time be confirmed before ordering?
Yes. Lead time and availability can be checked during the quotation process because supply conditions may change.
Is a higher-power alternative available?
Other S8FS-C ratings may be evaluated when the application requires additional current capacity or expansion margin.
Can this product be purchased for a machine-building project?
Yes. Project quotations can be prepared according to the technical requirements, order quantity, and delivery destination.
Can Emaconn assist with model comparison?
Technical selection support can be requested when comparing power ratings, terminal configurations, or potential replacement models.