Advantech RPS-1212-UK-US-AUS Power Supply
The Advantech RPS-1212-UK-US-AUS Power Supply identifies regional wall-mount power supply options developed for compatible Advantech industrial cellular routers and gateways. The available versions use UK, US, or Australian mains plugs while providing a regulated 12 VDC output. Emaconn can support customers with regional model selection, current pricing, availability checks, lead time information, and international quotations.
Regional Power Options for Industrial Routers
Industrial cellular routers require an appropriate DC supply to maintain remote communication, data transmission, telemetry, and equipment monitoring. The RPS-1212 regional power supply range converts an available AC source into the 12 VDC power required by compatible router models.
Separate order codes are used for the regional plug configurations. The UK version is intended for compatible British-style outlets, the US version supports the relevant North American plug format, and the AUS version is designed for compatible Australian outlets. Procurement teams must select the correct regional variant rather than treating UK, US, and AUS as a single interchangeable plug configuration.
All three specified versions provide the same principal electrical output: 12 VDC at up to 1 A, with a maximum rated power of 12 W. The connected router must operate within these limits.
Wide AC Input and Regulated DC Output
The power supplies accept an input range of 90 to 264 VAC. This wide input capability supports common mains conditions across multiple countries, but the physical plug and applicable regional requirements must still be verified.
The rated DC output is 12 V at 1 A. When selecting a supply, engineers should confirm the normal current requirement of the router as well as any connected equipment that may share the power source. The total load must not exceed the specified capacity.
The units meet ErP Level VI efficiency requirements and have a no-load power consumption specification of up to 0.1 W under the stated conditions. Natural convection cooling eliminates the need for an integrated fan.
Open-Wire Output for Router Integration
Each regional model includes a 1.5 m DC output cable with open-wire termination. This configuration allows the power supply to be connected to the appropriate power terminal on a compatible industrial router.
Open-wire installation requires correct conductor preparation and polarity verification. Qualified personnel should complete the connection according to the router documentation. The terminals must be tightened securely, and exposed conductors should not create a short-circuit or accidental-contact risk.
Cable routing should protect the output lead against heat, sharp edges, vibration, moving machinery, and excessive tension. Suitable strain relief should be used where required by the installation.
Applications in Industrial Connectivity
The Advantech RPS-1212-UK-US-AUS options may be considered for compatible cellular router installations used in:
- Remote machine monitoring and maintenance
- Industrial IoT and edge connectivity
- Utility, water, and energy infrastructure
- Transportation and distributed equipment networks
- Factory data communication systems
- Telemetry and remote asset management
The power supply should not be selected only because the connected router requires 12 VDC. Maximum load current, polarity, terminal arrangement, installation environment, cable length, plug format, and regional compliance must also correspond with the project.
Protection and Environmental Specifications
The power supply incorporates overcurrent and short-circuit protection with automatic recovery after the abnormal condition has been removed. Overvoltage limiting and a 1 A, 250 V input protection element are also specified. These protections support the adapter and connected system but do not remove the need for correct electrical installation.
The specified operating temperature range is 0 to 40°C, while the storage temperature range is -20 to 85°C. Operating humidity is specified from 8% to 90% relative humidity, and storage humidity extends from 5% to 95% relative humidity.
The adapter should be positioned in a dry and ventilated location. Natural airflow must not be obstructed, and the unit should be protected from condensation, contamination, direct heat, and mechanical damage.
Advantech RPS-1212-UK-US-AUS Compact Wall-Mount Construction
The adapter body measures approximately 64 × 45 × 30 mm. Depending on the regional plug version, its weight is approximately 50 to 76 g. The compact wall-mount design is suitable for installations where the router is located near an appropriate mains outlet.
Relevant safety and compliance references include CE EMC, CE LVD, IEC 62368, CB, CE, GS, FCC, cULus, SAA, and RCM among the listed regional approvals. The exact approval applicable to the selected plug version and destination should be confirmed before procurement.
Selecting the Correct Regional Version
Before ordering, buyers should verify the following:
- Destination country and required mains plug
- Exact regional order code
- Router model and electrical input requirements
- Required 12 VDC output and load current
- Open-wire polarity and terminal compatibility
- Available cable length and routing conditions
- Operating temperature and humidity
- Required regional approvals and documentation
Selecting the wrong regional version can create installation delays even when the electrical output is technically suitable. The final order should therefore state whether the UK, US, or AUS model is required.
Regional Procurement Support from Emaconn
Emaconn supports international B2B customers sourcing Advantech RPS-1212 power supplies for industrial router projects, replacement requirements, or maintenance inventories. Current price, stock status, estimated lead time, and commercial terms can be requested for the required regional version.
A quotation request should include the selected UK, US, or AUS configuration, router model, quantity, destination country, and preferred delivery date. Project-based and bulk requirements can also be evaluated.
Additional products are available through the Advantech industrial connectivity product range. Emaconn can assist with comparing regional plug variants and identifying a suitable power solution before an order is placed.
Conclusion
The Advantech RPS-1212-UK-US-AUS Power Supply range provides 12 VDC at up to 1 A for compatible industrial cellular routers, with separate plug versions for the UK, US, and Australia. Product selection should account for the exact regional order code, router load, polarity, terminal connection, environmental conditions, and applicable approvals. Contact Emaconn to confirm the required version, current pricing, availability, and delivery conditions.
Advantech RPS-1212-UK-US-AUS Frequently Asked Questions
Is RPS-1212-UK-US-AUS a single universal plug model?
No. UK, US, and AUS identify separate regional versions that must be selected according to the installation country.
What output voltage do these power supplies provide?
Each specified regional version provides a regulated 12 VDC output.
What is the maximum output current?
The maximum rated output current is 1 A, providing up to 12 W of output power.
What AC input range is supported?
The specified input range is 90 to 264 VAC, subject to the applicable plug and regional requirements.
How is the router connected to the adapter?
A 1.5 m output cable with open wires is provided for connection to a compatible router power terminal.
Can these adapters power any 12 V router?
No. Current demand, polarity, terminal arrangement, cable requirements, and environmental conditions must also be compatible.
How can I request pricing for a specific version?
State the required UK, US, or AUS version, quantity, destination, and delivery schedule when requesting a quotation.
How can current stock be checked?
Availability should be requested for the exact regional order code because stock levels may differ between plug versions.
Can different regional versions be included in one order?
Mixed regional requirements can be evaluated when the quantity and delivery destination for each version are provided.
Can Emaconn verify the correct model before purchase?
Yes. Provide the router model, destination country, electrical requirements, and quantity for pre-order selection support.