Omron E2E-X11D118-M1TGJ 0.3M Inductive Proximity Sensor
| Feature | Value |
|---|---|
| Sensor Type | Inductive proximity sensor |
| Series | E2E NEXT |
| Size | M18 |
| Mounting Type | Quasi-flush |
| Sensing Distance | 11 mm |
| Output Type | DC 2-wire |
| Operation Mode | NO |
| Connection Method | M12 pigtail Smartclick connector |
| Cable Length | 0.3 m |
| Cable Specification | Oil-resistant PVC |
| Housing Material | Nickel-plated brass |
| Overall Length | 55.3 mm |
| Thread Length | 33 mm |
| Protection Rating | IP67, IP67G, IP69K |
Technical Description
The Omron E2E-X11D118-M1TGJ 0.3M Inductive Proximity Sensor is an M18 inductive sensor with an 11 mm sensing distance, DC 2-wire output, and NO operation mode. Its 0.3 m pigtail cable with M12 Smartclick connector is useful where fast replacement and modular wiring are important.
This model is especially relevant for machine builders who prefer connector-based sensor layouts instead of long fixed cables. The nickel-plated brass housing and oil-resistant PVC cable support use in industrial automation environments.
Operating Principle
The sensor emits an electromagnetic field from the sensing face. When a metal target enters the active area, the field is affected by induced currents in the target. The sensor evaluates this change and switches the output state.
The Omron E2E-X11D118-M1TGJ 0.3M Inductive Proximity Sensor provides contactless detection, reducing mechanical wear and supporting stable feedback in repetitive machine cycles.
Usage Areas
- Connector-based machine wiring
- Modular automation systems
- Fixture position detection
- Metal carrier verification
- Machine tooling feedback
- Maintenance-friendly sensor installations
Omron E2E-X11D118-M1TGJ 0.3M Industrial Applications
In modular conveyor equipment, this sensor can be connected through standardized M12 cabling. In automotive tooling, it may confirm that a fixture is correctly positioned. In packaging and assembly machinery, the short pigtail design can simplify sensor replacement during maintenance.
Advantages
- M12 pigtail Smartclick connector
- Short 0.3 m cable for modular wiring
- 11 mm sensing distance
- M18 threaded housing
- NO output operation
- IP67, IP67G, and IP69K protection ratings
Sector-Specific Usage Examples
In automated production cells, the connector design supports rapid replacement without rerouting a full cable. In conveyor modules, it can detect metal stops or pallets. In machine tool automation, it can verify the position of a moving metal component before machining or transfer begins.
Selection Considerations
This product is appropriate when an M18 inductive sensor, 11 mm sensing range, NO output, and M12 pigtail connection are required. Engineers should confirm connector compatibility, target approach direction, available mounting depth, cable routing, and environmental protection requirements. Additional Omron sensor products can be reviewed for similar connector-based applications.
Omron E2E-X11D118-M1TGJ 0.3M Frequently Asked Questions
What is the connection method?
It uses a 0.3 m pigtail cable with an M12 Smartclick connector.
What is the sensing distance?
The sensing distance is 11 mm.
What body size does it have?
The sensor has an M18 body size.
What output operation is used?
The output operation mode is NO.
Why use a pigtail connector model?
It supports modular wiring and easier replacement compared with long fixed cable versions.
What materials are used?
The housing is nickel-plated brass and the cable is oil-resistant PVC.
Where can this sensor be applied?
It can be used in conveyors, machine tools, assembly fixtures, and modular automation systems.
What should be checked before installation?
Connector type, sensing distance, mounting style, output mode, and environmental protection should be verified.