Omron E2B-S08KS02-WP-B1 5M Inductive Proximity Sensor

The Omron E2B-S08KS02-WP-B1 5M Inductive Proximity Sensor is a compact M8 sensor designed for direct cable installation in industrial automation systems. Its 5 m prewired cable is useful when the sensing point is located away from a terminal box, junction module, or local I/O unit.

The Omron E2B-S08KS02-WP-B1 5M Inductive Proximity Sensor provides non-contact metal detection with a 2 mm sensing distance. Its flush mounting structure makes it suitable for machine parts where the sensor body must be installed level with surrounding metal surfaces.

Technical Description

This inductive sensor belongs to the Omron E2B cylindrical proximity sensor family. It uses a stainless steel M8 body, PNP normally open output, and PVC cable connection. The IP67 protection rating supports use in environments where dust and temporary moisture exposure may occur.

The normally open switching behavior means the output changes state when a valid metallic target enters the sensing field. This is practical for applications where the controller must receive a clear presence signal during machine sequencing.

Omron E2B-S08KS02-WP-B1 5M Working Principle

The sensing face produces a high-frequency electromagnetic field. When a conductive metallic object enters the sensing zone, eddy currents are generated in the object. These currents reduce the energy of the internal oscillator circuit.

The sensor detects this reduction and changes the PNP output state. Since the target does not need to touch the sensor, the device can be used in high-cycle industrial processes with limited mechanical wear.

Usage Areas

• Part detection in automated assembly equipment
• Position feedback in compact handling units
• Metal stop detection in conveyor mechanisms
• Presence confirmation in packaging machines
• Reference point detection in machine modules

Industrial Applications

Packaging Equipment

The sensor can confirm the position of metal guides, gates, or mechanical stops during packaging cycles.

Small Conveyor Sections

It can detect metallic carriers or indexing points where a short sensing distance is adequate.

Electromechanical Assembly Stations

The sensor can verify whether a metal component is correctly located before pressing, fastening, or inspection begins.

Omron E2B-S08KS02-WP-B1 5M Advantages

• Integrated 5 m cable for direct wiring
• M8 body for compact machine layouts
• Flush installation capability
• PNP normally open signal output
• Stainless steel housing construction
• IP67 protection for industrial environments
• Suitable for repeatable non-contact metal detection

Selection Considerations

Engineers should confirm the target material, target size, sensing distance, installation depth, and wiring route before selecting this model. The cable length should be evaluated against panel location and cable tray layout. The control input must also match PNP normally open switching.

For additional related models, visit Omron sensor products.

Omron E2B-S08KS02-WP-B1 5M Frequently Asked Questions

What does this sensor detect?

It detects metallic objects using inductive sensing technology.

What is the rated sensing distance?

The sensing distance is 2 mm.

What output type does it provide?

It provides a PNP normally open output.

Does it have a connector?

No. This version uses a 5 m prewired cable.

Can it be installed flush?

Yes. The shielded design allows flush mounting.

What is the housing material?

The housing is stainless steel.

What does IP67 mean for this sensor?

IP67 indicates protection against dust ingress and temporary water exposure under defined test conditions.

Which systems commonly use this model?

It is commonly used in PLC-controlled machines, conveyors, packaging equipment, and assembly automation.