Telemecanique XZCC8FDM30S Connector Technical Guide
The Telemecanique XZCC8FDM30S connector is a compact industrial cabling accessory designed for sensor and automation connections where space, reliability, and stable electrical contact matter. Built as a straight female M8 connector with 3 pins, this model is commonly associated with machine wiring, proximity sensor connections, compact control systems, and field-level automation devices.
Unlike larger industrial connectors, the XZCC8FDM30S is especially useful where equipment designers need a small connection interface without compromising environmental protection. Its M8 format supports dense machine layouts, while the straight body design helps create a clean cable route in cabinets, machinery frames, and sensor mounting areas.
Key Technical Characteristics
The Telemecanique XZCC8FDM30S is part of the Telemecanique cabling components range. It is classified as a cabling accessory and connector. The electrical connection is a straight female M8 interface with 3 pins. It uses a metal collar and has no status LED, making it suitable for installations where a simple, passive field connector is preferred.
The cable connection uses solder terminals for wire sizes under 0.25 mm², with a clamping capacity of 5 mm. The connector fixing system is screw-on, supporting secure mechanical engagement in industrial environments. Its cable gland type is M9.5, and the enclosure material is plastic.
Electrical Performance
This connector is rated for 60 V AC and 75 V DC, with a rated current of 4 A. These values place the XZCC8FDM30S in the category of low-voltage automation connectivity components used for signal and sensor-level wiring. It also has a minimum insulating resistance of 1 G? and contact resistance of 5000 µ?, which are important considerations for stable signal transfer in automated systems.
Environmental Protection
The connector has an IP67 protection rating, meaning it is designed to resist dust ingress and temporary water exposure when properly installed. Its operating temperature range is -40°C to 85°C, making it appropriate for many industrial environments, including cold storage machinery, packaging lines, material handling systems, and general factory automation.
Where This Connector Is Commonly Used
The Telemecanique XZCC8FDM30S connector is suitable for sensor wiring, compact machine automation, field device connections, and control panel interfaces. It is often selected when a 3-pin M8 female connector is required for simple signal transmission. Because it is supplied without an LED, it is a practical choice for installations where diagnostics are handled by the controller, HMI, or I/O module rather than at the connector itself.
For broader product context, see Telemecanique components.
Installation Considerations
Before installation, technicians should confirm the mating connector, pin configuration, voltage level, and cable diameter. Since this model uses solder terminals, correct wire preparation and clean soldering are essential for long-term reliability. The screw-on fixing method should be tightened securely, but not over-torqued, to preserve the integrity of the M8 connection.
In environments with vibration, moisture, dust, or repeated machine operation, the IP67 rating only applies when the connector is fully and correctly assembled. Cable strain relief should also be considered so that movement is not transferred directly to the soldered conductors.
FAQ
What type of product is the Telemecanique XZCC8FDM30S?
It is an industrial M8 straight female connector with 3 pins, used as a cabling accessory for automation and sensor wiring.
Is the XZCC8FDM30S suitable for outdoor or wet environments?
It has an IP67 rating when correctly assembled and connected. This makes it suitable for demanding industrial areas where dust and temporary water exposure may occur, but the full application environment should always be reviewed.
Does the Telemecanique XZCC8FDM30S connector include an LED?
No. This model is supplied without a status LED. It is intended for straightforward electrical connection rather than local visual indication.
What voltage and current does this connector support?
The connector is rated for 60 V AC, 75 V DC, and 4 A. These ratings make it suitable for low-voltage automation and sensor-related applications.
What is the operating temperature range?
The XZCC8FDM30S operates from -40°C to 85°C, allowing use across a wide range of industrial temperature conditions.