Telemecanique XS630B1NAM12 Inductive Proximity Sensor Guide

The Telemecanique XS630B1NAM12 inductive proximity sensor is an M30 cylindrical sensor designed for reliable non-contact detection of metallic targets. It belongs to the XS6 sensor family and is commonly used in machine automation, mobile equipment, metal handling, packaging systems, and position detection tasks where stable switching is required without mechanical contact.

This model has a nominal sensing distance of 15 mm and a flush mountable metal body. The flush design allows the sensor face to sit level with a surrounding metal surface when the correct installation clearances are followed. That makes the XS630B1NAM12 useful in areas where the sensor must be protected from impact or where compact installation is important.

Technical Characteristics

The XS630B1NAM12 uses a cylindrical M30 x 1.5 threaded brass housing with nickel plated enclosure material and a PPS front face. It has a 74 mm body length and an M12 4-pin male connector. The sensor works with a 12 to 48 V DC rated supply and includes reverse polarity protection. Its electrical design is based on a 3-wire DC circuit with NPN output and a normally open switching function.

The switching capacity is up to 200 mA DC with overload and short-circuit protection. The supply voltage limits extend from 10 to 58 V DC, which gives the device useful tolerance in real industrial control panels. The sensor also has a yellow LED output indicator, helping technicians confirm the switching state during setup, maintenance, and troubleshooting.

Telemecanique XS630B1NAM12 Performance in Industrial Applications

With a switching frequency up to 500 Hz, the Telemecanique XS630B1NAM12 inductive proximity sensor can support many repetitive sensing tasks, including moving part detection and metal object presence monitoring. The response delay is rated up to 0.6 ms, while recovery delay is up to 1.4 ms. These values make it suitable for systems where fast and repeatable signal feedback is needed.

The operating temperature range is -25 to 70 °C, with storage capability from -40 to 85 °C. It also provides IP67 and IP69K protection, supporting use in dusty, wet, and washdown-prone environments. For more related components, visit Telemecanique sensor information.

Telemecanique XS630B1NAM12 FAQ

What is the XS630B1NAM12 used for?

It is used to detect metallic objects without contact. Typical applications include actuator position sensing, machine guarding feedback, conveyor object detection, and metal part confirmation in automated equipment.

Is the XS630B1NAM12 flush mountable?

Yes. It is flush mountable, which means the sensing face can be installed level with metal surroundings when proper spacing rules are observed.

What output type does this sensor use?

It uses a 3-wire DC NPN normally open output. The output changes state when a suitable metal target enters the sensing zone.

What is the connection type?

The XS630B1NAM12 uses an M12 4-pin male connector, which is useful where quick replacement or modular wiring is preferred.

What is the sensing distance?

The nominal sensing distance is 15 mm. Actual detection distance can vary depending on the target material, target size, mounting conditions, and alignment.