Weidmüller 1007880000 ZP 2.5/2AN/QV ZAO.RA BL Connector Overview
The Weidmüller 1007880000 ZP 2.5/2AN/QV ZAO.RA BL plug-in connector is a Z-series terminal accessory intended for direct mounting and structured terminal block assembly. For engineers who manage existing installations or compare legacy part numbers, this code is especially useful because it combines the familiar Z-series electrical profile with a clearly published lifecycle status. In documentation-heavy industrial environments, that detail can be just as important as the nominal current or voltage rating.
This part is listed as a Z-series plug-in connector, direct mounting, with dimensions of approximately 41 mm depth, 36.5 mm height, and 10.2 mm width. The product page also states that it is discontinued, with a last order date of 15.08.2024. That makes the Weidmüller 1007880000 ZP 2.5/2AN/QV ZAO.RA BL connector primarily relevant for maintenance, replacement planning, and legacy system documentation rather than new long-term platform design.
What This Connector Does
The connector is intended for the additional assembly of terminal blocks. In practice, that means it serves as a plug-in accessory that helps expand or complement a terminal layout quickly. In large industrial panels, plug-in accessories are valued because they reduce repetitive installation effort and support a more modular approach to cabinet construction.
As part of the ZP 2.5 family, this connector aligns with terminal arrangements where compact dimensions and predictable connection behavior matter. Even when a product is no longer active, its engineering relevance remains high if equipment in the field still depends on the exact part geometry or mating logic.
Technical Profile
The wider ZP 2.5 family is associated with a rated cross-section of 2.5 mm², rated voltage of 500 V, maximum pluggable system voltage of 690 V, and nominal current of 24 A. Family-level conductor data for comparable variants shows support for 0.13 mm² to 4 mm², with AWG 26 to 12 and a 10 mm stripping length. These values show why the family is used in practical industrial terminal applications rather than only in very small-signal contexts.
The published dimensional data of the specific 1007880000 variant is also important. Size can be a deciding factor when exact fit is required in legacy terminal assemblies or when replacement planning must stay close to the original panel layout.
Why the Discontinued Status Matters
The lifecycle status is the most strategic detail here. Since the Weidmüller 1007880000 connector is discontinued, engineers should be careful about specifying it into new systems that require long-term procurement continuity. In contrast, it remains highly useful for installed-base support, service manuals, spare part planning, and exact reference validation in existing equipment.
That makes this kind of part especially relevant for maintenance departments, technical purchasers, retrofit engineers, and documentation teams. In industrial environments, part numbers often remain operationally important long after they leave the active catalog.
Where It Still Adds Value
The Weidmüller 1007880000 Z-series plug-in connector is still valuable wherever technical files, replacement workflows, or system modernization projects require accurate part matching. It can also serve as a benchmark when comparing currently active alternatives in the same connector family.
For more information about Weidmüller, it is useful to compare active Z-series accessories before planning a redesign or a long-term replacement strategy.
FAQ
What is the Weidmüller 1007880000 ZP 2.5/2AN/QV ZAO.RA BL?
It is a Z-series plug-in connector for direct mounting and the additional assembly of terminal blocks in industrial cabinet systems.
Is the Weidmüller 1007880000 still active?
No. The product page marks it as discontinued and lists a last order date of 15 August 2024.
Why does this part still matter if it is discontinued?
Discontinued parts are often essential for maintenance, legacy documentation, and exact replacement work. In many installed systems, accurate reference matching is more important than active catalog status.
What are the key family-level electrical values?
The ZP 2.5 family is associated with 2.5 mm² rated cross-section, 500 V rated voltage, 690 V maximum system voltage, and 24 A nominal current.
What dimensions are listed for this variant?
The product page shows approximately 41 mm depth, 36.5 mm height, and 10.2 mm width.
Should it be used in new projects?
Only after careful lifecycle review. In most new developments, engineers will usually prefer an active equivalent for better long-term supply security.