Omron Y92E-M12PURSH8S5M-L Industrial Automation Component: Technical Guide and Application Manual
Not every datasheet reflects true product performance. The Omron Y92E-M12PURSH8S5M-L Industrial Automation Component looks straightforward on paper — 12-24V DC, standard mount — but its real value shows up after six months in demanding environments like industrial automation.
Many engineers working with this product also specify other Omron Omron Sensor models on the same project. The shared ecosystem means cable standards and mounting accessories are compatible.
Understanding the Omron Y92E-M12PURSH8S5M-L Industrial Automation Component
The Omron Y92E-M12PURSH8S5M-L is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
Technically, the Omron Y92E-M12PURSH8S5M-L delivers omron quality assurance. 12-24V DC voltage rating simplifies system integration.
Core Specifications
The table below summarises the main technical parameters of the Omron Y92E-M12PURSH8S5M-L. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN output |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Application Scenarios
The Omron Y92E-M12PURSH8S5M-L Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron Y92E-M12PURSH8S5M-L is designed with exactly those conditions in mind.
Getting It Right at Installation
Installation is straightforward: determine the mounting location, secure the sensor with screws or bracket, connect the cable to the correct terminals, and adjust the target distance. The Omron Y92E-M12PURSH8S5M-L Industrial Automation Component requires no specialised tools.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Engineers Choose Omron
Specifying the Omron Y92E-M12PURSH8S5M-L Industrial Automation Component also means specifying into an ecosystem. Omron’s portfolio covers sensors, relays, PLCs, power supplies, and more — all engineered to work together.
Frequently Asked Questions
What applications is the Omron Y92E-M12PURSH8S5M-L designed for?
The Omron Y92E-M12PURSH8S5M-L Industrial Automation Component is designed primarily for industrial automation, control systems, machine building.
What voltage does the Omron Y92E-M12PURSH8S5M-L operate at?
The Omron Y92E-M12PURSH8S5M-L operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron Y92E-M12PURSH8S5M-L?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron Y92E-M12PURSH8S5M-L Industrial Automation Component is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron Y92E-M12PURSH8S5M-L have?
The Omron Y92E-M12PURSH8S5M-L Industrial Automation Component has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron Y92E-M12PURSH8S5M-L in Europe?
The Omron Y92E-M12PURSH8S5M-L Industrial Automation Component is available through Omron’s authorised European distributors.