Omron XS6W-6LSZH8SS200CM-B Ethernet Patch Cable

The Omron XS6W-6LSZH8SS200CM-B Ethernet Patch Cable is designed for industrial Ethernet connections where stable data transmission, structured cabling, and panel-level reliability are required. It uses RJ45 straight plugs on both ends and a Cat.6A F/UTP cable structure, making it suitable for communication links between controllers, industrial switches, remote I/O stations, machine interfaces, and network-enabled automation devices.

With a 2 m cable length, blue LSZH outer sheath, and 6.3 mm cable diameter, this cable is typically applied in control cabinets, machine wiring zones, and automation panels where cable routing must remain organized and clearly identifiable. The Omron XS6W-6LSZH8SS200CM-B Ethernet Patch Cable is not a sensor or control unit; it is a passive network connection component used to support Ethernet-based communication infrastructure.

Technical Description

This cable is built as an F/UTP industrial Ethernet patch cable. In an F/UTP construction, the cable includes an overall foil shield around the twisted pairs. This shielding approach helps reduce the influence of electromagnetic interference in environments where drives, power supplies, contactors, relays, and motor cables may operate near communication wiring.

The RJ45 straight plug configuration on both ends allows direct connection between compatible Ethernet ports without angled connector orientation. The Cat.6A rating supports high-frequency Ethernet transmission requirements when used within a correctly designed network system. The LSZH sheath is intended for applications where reduced smoke and halogen emissions are preferred compared with conventional halogenated cable jackets.

Working Principle

The Omron XS6W-6LSZH8SS200CM-B Ethernet Patch Cable transfers digital communication signals between two Ethernet-enabled devices. Data is transmitted through internal twisted conductors, while the shield structure helps limit external noise coupling. The RJ45 connectors provide the physical interface to the communication ports of devices such as PLCs, industrial Ethernet switches, HMIs, gateways, and machine controllers.

As a passive cable assembly, it does not process signals, convert protocols, or regulate voltage. Its function is to maintain a physical communication path with the appropriate impedance, conductor arrangement, connector alignment, and shielding required for industrial Ethernet operation.

Usage Areas

• PLC-to-switch Ethernet connections inside control panels
• Machine network links between automation controllers and HMIs
• Industrial Ethernet wiring for production equipment
• Remote I/O station communication cabling
• Panel wiring in compact automation enclosures
• Short-distance patching between network components

For related industrial network components, Omron sensor products can be evaluated together with compatible control, sensing, and connectivity solutions.

Industrial Applications

In packaging machinery, this cable can be used to connect a controller to an Ethernet switch that distributes communication to inspection stations, operator panels, and motion control devices. In assembly lines, it may support short patch connections between cabinet-mounted communication hardware and machine-level network nodes.

In material handling systems, the cable can be installed inside electrical panels where PLCs, barcode readers, distributed I/O blocks, and supervisory network devices exchange operational data. In test benches or laboratory automation systems, the 2 m length provides practical routing flexibility without excessive cable slack.

Omron XS6W-6LSZH8SS200CM-B Advantages

• Cat.6A transmission category for industrial Ethernet infrastructure
• F/UTP shielding for improved resistance against external electrical noise
• RJ45 straight plugs on both ends for standard Ethernet port connection
• LSZH sheath material for applications requiring low-smoke cable jackets
• Blue outer sheath for visual identification in network wiring layouts
• 2 m cable length suitable for cabinet and machine-level patching

Sector-Based Usage Examples

Packaging Automation

The cable can connect an industrial Ethernet switch to a PLC inside a packaging machine cabinet, helping maintain communication between control logic and machine interface devices.

Automotive Assembly

In automated assembly cells, it can be used for short Ethernet links between control panels and local communication modules where shielded cabling is required near electrically active equipment.

Food Processing Equipment

When installed inside protected control enclosures, the LSZH sheath and blue jacket can support organized cabinet wiring for Ethernet-connected control components.

Intralogistics Systems

The Omron XS6W-6LSZH8SS200CM-B Ethernet Patch Cable may be used in conveyor control panels to connect PLCs, switches, gateways, and monitoring devices within a structured industrial network.

Omron XS6W-6LSZH8SS200CM-B Selection Considerations

Before selecting this product, verify that the required cable length is 2 m and that both connected devices use RJ45 Ethernet ports. The straight plug orientation should also match the available installation space around the device ports. If the cable will be routed near power wiring or motor drive equipment, the F/UTP construction is an important consideration for noise reduction.

The sheath material should be reviewed according to the project environment. LSZH cable jackets are commonly specified where cable behavior during fire conditions is part of the installation requirement. The blue sheath color may also be useful for separating industrial Ethernet lines from power, safety, or fieldbus wiring in cabinet documentation.

Omron XS6W-6LSZH8SS200CM-B Frequently Asked Questions

What is the Omron XS6W-6LSZH8SS200CM-B Ethernet Patch Cable used for?

It is used to create a physical Ethernet connection between industrial automation devices such as PLCs, switches, HMIs, gateways, and control modules.

What type of connectors does this cable have?

It has RJ45 straight plugs on both ends, allowing direct connection to compatible Ethernet ports.

Is this cable Cat.6A rated?

Yes, the cable is specified as Cat.6A, making it suitable for industrial Ethernet communication systems designed around that category.

What does F/UTP mean?

F/UTP refers to a cable structure with an overall foil shield around the twisted pairs. This helps reduce the impact of electromagnetic interference.

What is the cable length?

The cable length is 2 m, which is suitable for short patch connections inside panels or between nearby industrial network devices.

Why is LSZH sheath material important?

LSZH material produces lower smoke and halogen emissions compared with many conventional cable jackets, which may be required in specific installation environments.

Can this cable be used with a PLC?

Yes, it can be used with PLCs that have compatible RJ45 Ethernet ports, provided the network design and installation requirements are met.

What should be checked before installation?

Check connector compatibility, required cable length, routing space, bend management, shielding requirements, and the environmental suitability of the LSZH sheath.