Omron XS5W-T421-EMD-K Industrial Ethernet Cable

The Omron XS5W-T421-EMD-K Industrial Ethernet Cable is designed for industrial Ethernet applications requiring secure M12 connections at both ends of the communication link. Equipped with dual M12 Smartclick straight connectors, the cable enables direct connectivity between industrial field devices without the need for an intermediate RJ45 interface. Its Category 5e performance and SF/UTP shielded construction support stable Ethernet communication in environments where electrical noise, vibration, and demanding operating conditions are common.

The Omron XS5W-T421-EMD-K Industrial Ethernet Cable is suitable for connecting Ethernet-enabled sensors, remote I/O stations, industrial cameras, machine controllers, and other automation devices that utilize M12 Ethernet interfaces. The Smartclick connector system simplifies installation while maintaining a secure mechanical connection throughout machine operation.

Omron XS5W-T421-EMD-K Technical Description

This cable incorporates two straight M12 Smartclick connectors, allowing direct communication between compatible industrial Ethernet devices. Unlike cable assemblies that terminate with an RJ45 connector, this model is intended for installations where both connected devices are equipped with sealed M12 Ethernet ports.

The shielded SF/UTP cable construction helps reduce electromagnetic interference originating from servo drives, inverters, switching equipment, and heavy industrial machinery. The blue PVC outer jacket provides mechanical protection during installation while supporting cable identification within industrial control systems.

Working Principle

The cable serves as a passive communication link that transfers Ethernet data between two industrial devices using shielded twisted-pair conductors. No signal processing or conversion takes place inside the cable, allowing communication to occur according to the Ethernet protocol supported by the connected equipment.

Both M12 Smartclick connectors provide reliable mechanical retention while maintaining IP67 protection when correctly mated. This design supports dependable network communication in production environments exposed to dust, vibration, moisture, and industrial contaminants.

Omron XS5W-T421-EMD-K Typical Applications

• Industrial Ethernet field networks
• Machine-to-machine communication
• Remote I/O connectivity
• Industrial vision systems
• Factory automation equipment
• Servo control systems
• Packaging machinery
• EtherCAT and EtherNet/IP device connections

Industrial Application Examples

Automated Production Lines

Provides direct Ethernet communication between decentralized controllers, field devices, and industrial communication modules equipped with M12 ports.

Machine Automation

Supports communication between motion control equipment and Ethernet-enabled automation devices without introducing additional connection adapters.

Industrial Inspection Systems

Connects vision sensors and inspection equipment operating within Ethernet-based manufacturing networks.

Material Handling Systems

Used for communication between distributed field devices installed on conveyor systems, transfer units, and automated logistics equipment.

Advantages

• Dual M12 Smartclick connector configuration
• Category 5e industrial Ethernet performance
• SF/UTP shielded cable construction
• 3-meter cable length
• Blue PVC outer sheath for industrial use
• IP67 protection with properly connected M12 interfaces
• Suitable for direct field device communication
• Supports industrial Ethernet network reliability

Selection Considerations

Before selecting an industrial Ethernet cable, engineers should verify the connector interface available on both connected devices. Applications using two M12 Ethernet ports can benefit from a direct M12-to-M12 cable assembly that eliminates unnecessary adapters and additional connection points.

Other important considerations include cable length, shielding requirements, environmental exposure, installation routing, network protocol compatibility, and available space around field-mounted equipment.

Related Omron Industrial Connectivity Products

Additional Ethernet cables, industrial connectors, and automation communication accessories are available in the Omron sensor product range.

Frequently Asked Questions

1. Which connectors are installed on this cable?

Both ends are fitted with straight M12 Smartclick Ethernet connectors.

2. What Ethernet category does this model support?

The cable is designed for Category 5e industrial Ethernet communication.

3. Is the cable shielded?

Yes. It features an SF/UTP shielded construction to help minimize electromagnetic interference.

4. What is the cable length?

The nominal cable length is 3 meters.

5. Where is this cable typically used?

It is commonly installed between industrial Ethernet devices equipped with M12 communication interfaces, including remote I/O units, sensors, machine controllers, and industrial cameras.

6. Does the cable require an RJ45 adapter?

No. This model provides an M12 connector on both ends, allowing direct device-to-device Ethernet connections where compatible interfaces are available.

7. Does the cable provide environmental protection?

When both M12 connectors are correctly mated, the connection achieves an IP67 protection rating suitable for industrial environments.

8. What should be verified before selecting this cable?

Engineers should confirm connector type, cable length, Ethernet compatibility, environmental conditions, shielding requirements, and the installation layout before deployment.