Omron TL-N10ME1 2M Industrial Automation Component: Technical Guide and Application Manual
Some sensors look good on a catalogue page but disappoint in the field. The Omron TL-N10ME1 2M Industrial Automation Component is not one of them — 12-24V DC operating voltage, IP67 protection and proven durability in industrial automation make it ready for real-world conditions.
For projects where sensing and control decisions must be made together, Omron’s Omron Sensor products are a natural companion to this unit. Both families are built to the same quality standards.
About the Omron TL-N10ME1 2M Industrial Automation Component
The Omron TL-N10ME1 2M is a Industrial Automation Component rated at 12-24V DC, with 2 m cable length, designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance, cable 2 m.
The engineering case for the Omron TL-N10ME1 2M Industrial Automation Component rests on clear advantages: omron quality assurance, cable 2 m. Voltage rating 12-24V DC, factory-fitted 2 m cable, covers most industrial installation scenarios.
Specifications at a Glance
The table below summarises the main technical parameters of the Omron TL-N10ME1 2M. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Cable Length | 2 m |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance, cable 2 m |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Industry Use Cases
The Omron TL-N10ME1 2M Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron TL-N10ME1 2M is designed with exactly those conditions in mind.
Installation Checklist
Installation is straightforward: determine the mounting location, secure the sensor with screws or bracket, connect the cable to the correct terminals, and adjust the target distance. The Omron TL-N10ME1 2M Industrial Automation Component requires no specialised tools.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Omron TL-N10ME1 2M: Long-Term Value
Omron’s reputation in automation did not come from clever advertising. It came from decades of sensors performing reliably in factories worldwide. The TL-N10ME1 2M Industrial Automation Component is a current embodiment of that engineering culture.
Frequently Asked Questions
What applications is the Omron TL-N10ME1 2M designed for?
The Omron TL-N10ME1 2M Industrial Automation Component is designed primarily for industrial automation, control systems, machine building.
What voltage does the Omron TL-N10ME1 2M operate at?
The Omron TL-N10ME1 2M operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron TL-N10ME1 2M?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron TL-N10ME1 2M Industrial Automation Component is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron TL-N10ME1 2M have?
The Omron TL-N10ME1 2M Industrial Automation Component has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron TL-N10ME1 2M in Europe?
The Omron TL-N10ME1 2M Industrial Automation Component is available through Omron’s authorised European distributors.