Omron S8VK-G24024 DIN Rail Switching Power Supply: Technical Guide, Applications and Installation
There is a reason certain relay and switch models appear in panel after panel across different industries: they simply work. The Omron S8VK-G24024 DIN Rail Switching Power Supply is one of those models— it operates at 85–264V AC → 24V DC and has become a go-to choice for PLC and sensor power supply applications.
For projects where sensing and switching decisions need to be made together, Omron’s Omron Sensor products are a natural companion to this unit. Both families are built to the same quality standards and documented to the same CE and UL requirements, which simplifies the declaration of conformity process.
About the Omron S8VK-G24024 DIN Rail Switching Power Supply
The Omron S8VK-G24024 is a DIN Rail Switching Power Supply rated at 85–264V AC → 24V DC, built to handle PLC and sensor power supply reliably over a long service life. Key engineering features include output: 240w at 24v dc, 91% efficiency, 85–264v ac wide input, ce/ul certified, and the unit mounts via din rail.
The engineering case for the Omron S8VK-G24024 DIN Rail Switching Power Supply rests on a clear set of advantages: output: 240w at 24v dc, 91% efficiency, 85–264v ac wide input, ce/ul certified. Operating voltage of 85–264V AC → 24V DC slots neatly into most European and global panel designs.
Specifications at a Glance
The table below summarises the main technical parameters of the Omron S8VK-G24024. For full specifications, always refer to the official Omron product datasheet, as application-specific derating may apply.
| Parameter | Value |
|---|---|
| Product Type | DIN Rail Switching Power Supply |
| Coil / Operating Voltage | 85–264V AC → 24V DC |
| Key Features | Output: 240W at 24V DC, 91% efficiency, 85–264V AC wide input, CE/UL certified |
| Mounting | DIN rail |
| Operating Temperature | -25 °C to +70 °C |
Industry Use Cases
The Omron S8VK-G24024 DIN Rail Switching Power Supply is commonly specified for the following applications:
- Plc and sensor power supply
- Control panels
- Automation systems
Across these use cases, the consistent thread is a need for dependable switching over a large number of operations, often in environments where an unplanned fault would create significant disruption. The Omron S8VK-G24024 is designed with exactly those conditions in mind.
Installation Checklist
When mounting the Omron S8VK-G24024 DIN Rail Switching Power Supply in a panel, pay attention to three things: the socket or rail type must be the correct Omron-specified match; the terminal wiring must use appropriate cable gauge; and there must be enough vertical clearance to allow the unit to be removed for service without disturbing adjacent wiring. Getting these details right at installation saves considerable time later.
For ongoing maintenance, periodically inspect for contact discolouration, check terminal screws for loosening, and look for any signs of heat stress on the housing. Catching these early avoids the much larger cost of an unplanned production stop.
Omron S8VK-G24024: Long-Term Value
Omron’s reputation in automation did not come from clever advertising. It came from decades of components performing reliably in factories, warehouses, and process plants around the world. The S8VK-G24024 DIN Rail Switching Power Supply is a current embodiment of that engineering culture — nothing superfluous, nothing compromised.
Frequently Asked Questions
How do I install the Omron S8VK-G24024?
Mount the Omron S8VK-G24024 DIN Rail Switching Power Supply on a 35 mm DIN rail using the compatible socket or directly as specified. De-energise the circuit before installation, connect cables at the rated cross-section, and tighten terminal screws to the torque values stated in the datasheet.
What is the electrical lifespan of the Omron S8VK-G24024?
Electrical lifespan depends on switching frequency and load type. At rated resistive load, Omron relay products typically achieve several hundred thousand to over a million operations. The exact figure for the Omron S8VK-G24024 is stated in its technical datasheet.
Can the Omron S8VK-G24024 switch inductive loads?
Yes, but inductive loads reduce contact lifespan due to higher arc energy at switch-off. For frequent inductive switching with the Omron S8VK-G24024 DIN Rail Switching Power Supply, a suppression device — such as a varistor or RC snubber — is recommended across the load.
Is the Omron S8VK-G24024 RoHS compliant?
Omron products conform to the RoHS Directive requirements. Specific compliance documentation for the Omron S8VK-G24024 can be requested from your authorised Omron distributor.
What should I check during periodic maintenance of the Omron S8VK-G24024?
Inspect contact surfaces for pitting or discolouration, check terminal screws for loosening (particularly in high-vibration environments), and verify that the housing shows no thermal discolouration. Replace the unit if any of these signs are present.