Omron S8VK-G06024 DIN Rail Switching Power Supply: Technical Guide, Applications and Installation
Picking the right component for a control panel takes more than scanning a catalogue. The Omron S8VK-G06024 is a DIN Rail Switching Power Supply that has earned its place on the shortlist of engineers who value long service life over a bargain price — particularly in PLC and sensor power supply applications.
Many engineers working with this product also specify Omron Omron Sensor solutions on the same project. The shared ecosystem means signal levels, cable standards, and mounting accessories align across product families — a practical advantage that saves time during panel design and commissioning.
What Is the Omron S8VK-G06024 DIN Rail Switching Power Supply?
The Omron S8VK-G06024 is a DIN Rail Switching Power Supply rated at 85–264V AC → 24V DC, built to handle PLC and sensor power supply reliably over a long service life. Key engineering features include output: 60w at 24v dc, 91% efficiency, 85–264v ac wide input, ce/ul certified, and the unit mounts via din rail.
What separates this unit from generic alternatives is in the details: output: 60w at 24v dc, 91% efficiency, 85–264v ac wide input, ce/ul certified. The coil operates at 85–264V AC → 24V DC, making it straightforward to match to existing control voltage buses without additional transformers or converters.
Technical Specifications
The table below summarises the main technical parameters of the Omron S8VK-G06024. For full specifications, always refer to the official Omron product datasheet, as application-specific derating may apply.
| Parameter | Value |
|---|---|
| Product Type | DIN Rail Switching Power Supply |
| Coil / Operating Voltage | 85–264V AC → 24V DC |
| Key Features | Output: 60W at 24V DC, 91% efficiency, 85–264V AC wide input, CE/UL certified |
| Mounting | DIN rail |
| Operating Temperature | -25 °C to +70 °C |
Where Is It Used?
The Omron S8VK-G06024 DIN Rail Switching Power Supply is commonly specified for the following applications:
- Plc and sensor power supply
- Control panels
- Automation systems
Across these use cases, the consistent thread is a need for dependable switching over a large number of operations, often in environments where an unplanned fault would create significant disruption. The Omron S8VK-G06024 is designed with exactly those conditions in mind.
Installation Notes
The Omron S8VK-G06024 DIN Rail Switching Power Supply follows standard DIN rail mounting practice. Before inserting the unit into its socket or fixing it to the rail, always verify the circuit is fully de-energised. Check that cable cross-sections are appropriate for the load, and after commissioning, mark the panel clearly with the device type and rated voltage for future maintenance reference.
For ongoing maintenance, periodically inspect for contact discolouration, check terminal screws for loosening, and look for any signs of heat stress on the housing. Catching these early avoids the much larger cost of an unplanned production stop.
Why Choose the Omron S8VK-G06024?
The case for choosing the Omron S8VK-G06024 DIN Rail Switching Power Supply is not built on marketing alone. It rests on measurable factors: documented mechanical and electrical lifespan ratings, certifications that satisfy CE and UL requirements, and a global spare parts network that means you can source a replacement quickly when a unit eventually reaches end of life.
Frequently Asked Questions
What is the difference between the Omron S8VK-G06024 and a mechanical contactor?
The Omron S8VK-G06024 DIN Rail Switching Power Supply is designed for panel-level signal and load switching at the current ratings specified. A contactor is built for direct motor starting at higher currents. For applications within the rated capacity of the Omron S8VK-G06024, it offers faster switching, longer life, and a smaller footprint than a contactor.
How does temperature affect the Omron S8VK-G06024?
Like all electromechanical devices, performance can be affected at the extremes of the operating temperature range. The Omron S8VK-G06024 is rated for use across a defined ambient temperature range — consult the datasheet for precise limits and any derating requirements at elevated temperatures.
Can I mount multiple Omron S8VK-G06024 units side by side on a DIN rail?
Yes. The Omron S8VK-G06024 DIN Rail Switching Power Supply is designed for standard DIN rail assembly with adjacent units. Ensure adequate total load current is within the rail and busbar capacity, and that enclosure ventilation is sufficient for the combined heat dissipation.
Does the Omron S8VK-G06024 include a test facility?
Depending on the model variant, some Omron relay sockets include a manual test button or push-to-test function. Check the specific socket model specified for the Omron S8VK-G06024 to confirm whether this feature is available.
How long is the warranty on the Omron S8VK-G06024?
Omron provides a standard 12-month manufacturer warranty on products purchased through authorised distributors. Extended warranty options may be available — contact your local Omron distributor for details.