Omron S8VK-G01505 DIN Rail Switching Power Supply: Technical Guide, Applications and Installation
Industrial automation decisions are rarely reversed quickly. Choosing the Omron S8VK-G01505 DIN Rail Switching Power Supply for PLC and sensor power supply applicationsat 85–264V AC → 5V DC is the kind of decision that stays looking smart years later, when the system is still running without issues.
For projects where sensing and switching decisions need to be made together, Omron’s Omron Sensor products are a natural companion to this unit. Both families are built to the same quality standards and documented to the same CE and UL requirements, which simplifies the declaration of conformity process.
What Is the Omron S8VK-G01505 DIN Rail Switching Power Supply?
The Omron S8VK-G01505 is a DIN Rail Switching Power Supply rated at 85–264V AC → 5V DC, built to handle PLC and sensor power supply reliably over a long service life. Key engineering features include output: 15w at 5v dc, 91% efficiency, 85–264v ac wide input, ce/ul certified, and the unit mounts via din rail.
What separates this unit from generic alternatives is in the details: output: 15w at 5v dc, 91% efficiency, 85–264v ac wide input, ce/ul certified. The coil operates at 85–264V AC → 5V DC, making it straightforward to match to existing control voltage buses without additional transformers or converters.
Technical Specifications
The table below summarises the main technical parameters of the Omron S8VK-G01505. For full specifications, always refer to the official Omron product datasheet, as application-specific derating may apply.
| Parameter | Value |
|---|---|
| Product Type | DIN Rail Switching Power Supply |
| Coil / Operating Voltage | 85–264V AC → 5V DC |
| Key Features | Output: 15W at 5V DC, 91% efficiency, 85–264V AC wide input, CE/UL certified |
| Mounting | DIN rail |
| Operating Temperature | -25 °C to +70 °C |
Where Is It Used?
The Omron S8VK-G01505 DIN Rail Switching Power Supply is commonly specified for the following applications:
- Plc and sensor power supply
- Control panels
- Automation systems
Across these use cases, the consistent thread is a need for dependable switching over a large number of operations, often in environments where an unplanned fault would create significant disruption. The Omron S8VK-G01505 is designed with exactly those conditions in mind.
Installation Notes
Commissioning the Omron S8VK-G01505 DIN Rail Switching Power Supply is straightforward. Snap or screw it into position on the DIN rail, connect cables at the correct terminals, and confirm polarity where applicable. During the first powered test, verify that the indicator LED (where fitted) responds correctly and that the output contacts behave as expected under a controlled test load.
For ongoing maintenance, periodically inspect for contact discolouration, check terminal screws for loosening, and look for any signs of heat stress on the housing. Catching these early avoids the much larger cost of an unplanned production stop.
Why Choose the Omron S8VK-G01505?
The case for choosing the Omron S8VK-G01505 DIN Rail Switching Power Supply is not built on marketing alone. It rests on measurable factors: documented mechanical and electrical lifespan ratings, certifications that satisfy CE and UL requirements, and a global spare parts network that means you can source a replacement quickly when a unit eventually reaches end of life.
Frequently Asked Questions
What applications is the Omron S8VK-G01505 designed for?
The Omron S8VK-G01505 DIN Rail Switching Power Supply is designed primarily for PLC and sensor power supply, control panels, automation systems. Its construction and contact ratings make it well suited to both continuous-duty and intermittent switching in these environments.
What coil voltage does the Omron S8VK-G01505 use?
The Omron S8VK-G01505 operates at a coil voltage of 85–264V AC → 5V DC. Always verify that your control circuit voltage matches before installation.
Does the Omron S8VK-G01505 require a specific socket?
Yes, Omron designs its relay families to work with specific matched sockets. Using a non-specified socket can affect contact pressure and shorten service life. Refer to the Omron S8VK-G01505 datasheet for the compatible socket model.
What certifications does the Omron S8VK-G01505 carry?
Omron products are manufactured to CE and UL standards, with additional certifications depending on the model. Product-specific certification details are available in the official Omron datasheet and on the product label.
Where can I source the Omron S8VK-G01505 in Europe?
The Omron S8VK-G01505 DIN Rail Switching Power Supply is available through Omron’s authorised European distributors. Purchasing through official channels ensures product authenticity, full warranty coverage, and access to technical support.