Omron S8FS-C03524 Ultra-Compact SMPS Power Supply: Technical Guide, Applications and Installation
When a machine has to run 24/7, component selection is not about saving a few euros on the BOM — it is about selecting items that will not become a production problem. The Omron S8FS-C03524 Ultra-Compact SMPS Power Supply (85–264V AC → 24V DC) is designed precisely for that reality, with small control panels at the top of its application list.
Many engineers working with this product also specify Omron Omron Sensor solutions on the same project. The shared ecosystem means signal levels, cable standards, and mounting accessories align across product families — a practical advantage that saves time during panel design and commissioning.
About the Omron S8FS-C03524 Ultra-Compact SMPS Power Supply
The Omron S8FS-C03524 is a Ultra-Compact SMPS Power Supply rated at 85–264V AC → 24V DC, built to handle small control panels reliably over a long service life. Key engineering features include output: 35w at 24v dc, ultra-compact housing, ce certified, and the unit mounts via din rail.
The engineering case for the Omron S8FS-C03524 Ultra-Compact SMPS Power Supply rests on a clear set of advantages: output: 35w at 24v dc, ultra-compact housing, ce certified. Operating voltage of 85–264V AC → 24V DC slots neatly into most European and global panel designs.
Specifications at a Glance
The table below summarises the main technical parameters of the Omron S8FS-C03524. For full specifications, always refer to the official Omron product datasheet, as application-specific derating may apply.
| Parameter | Value |
|---|---|
| Product Type | Ultra-Compact SMPS Power Supply |
| Coil / Operating Voltage | 85–264V AC → 24V DC |
| Key Features | Output: 35W at 24V DC, ultra-compact housing, CE certified |
| Mounting | DIN rail |
| Operating Temperature | -25 °C to +70 °C |
Industry Use Cases
The Omron S8FS-C03524 Ultra-Compact SMPS Power Supply is commonly specified for the following applications:
- Small control panels
- Sensor power supply
- Compact machine panels
Across these use cases, the consistent thread is a need for dependable switching over a large number of operations, often in environments where an unplanned fault would create significant disruption. The Omron S8FS-C03524 is designed with exactly those conditions in mind.
Installation Checklist
Commissioning the Omron S8FS-C03524 Ultra-Compact SMPS Power Supply is straightforward. Snap or screw it into position on the DIN rail, connect cables at the correct terminals, and confirm polarity where applicable. During the first powered test, verify that the indicator LED (where fitted) responds correctly and that the output contacts behave as expected under a controlled test load.
For ongoing maintenance, periodically inspect for contact discolouration, check terminal screws for loosening, and look for any signs of heat stress on the housing. Catching these early avoids the much larger cost of an unplanned production stop.
Omron S8FS-C03524: Long-Term Value
Omron’s reputation in automation did not come from clever advertising. It came from decades of components performing reliably in factories, warehouses, and process plants around the world. The S8FS-C03524 Ultra-Compact SMPS Power Supply is a current embodiment of that engineering culture — nothing superfluous, nothing compromised.
Frequently Asked Questions
What applications is the Omron S8FS-C03524 designed for?
The Omron S8FS-C03524 Ultra-Compact SMPS Power Supply is designed primarily for small control panels, sensor power supply, compact machine panels. Its construction and contact ratings make it well suited to both continuous-duty and intermittent switching in these environments.
What coil voltage does the Omron S8FS-C03524 use?
The Omron S8FS-C03524 operates at a coil voltage of 85–264V AC → 24V DC. Always verify that your control circuit voltage matches before installation.
Does the Omron S8FS-C03524 require a specific socket?
Yes, Omron designs its relay families to work with specific matched sockets. Using a non-specified socket can affect contact pressure and shorten service life. Refer to the Omron S8FS-C03524 datasheet for the compatible socket model.
What certifications does the Omron S8FS-C03524 carry?
Omron products are manufactured to CE and UL standards, with additional certifications depending on the model. Product-specific certification details are available in the official Omron datasheet and on the product label.
Where can I source the Omron S8FS-C03524 in Europe?
The Omron S8FS-C03524 Ultra-Compact SMPS Power Supply is available through Omron’s authorised European distributors. Purchasing through official channels ensures product authenticity, full warranty coverage, and access to technical support.