Omron R88D-1SN02H-ECT Industrial Automation Component: Technical Guide and Application Manual
Some sensors look good on a catalogue page but disappoint in the field. The Omron R88D-1SN02H-ECT Industrial Automation Component is not one of them — 12-24V DC operating voltage, IP67 protection and proven durability in industrial automation make it ready for real-world conditions.
In a well-designed automation system, all components of the sensing layer must work in harmony. Omron’s Omron Sensor family is engineered to feed signals to relays and controllers from the same manufacturer.
About the Omron R88D-1SN02H-ECT Industrial Automation Component
The Omron R88D-1SN02H-ECT is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
The engineering case for the Omron R88D-1SN02H-ECT Industrial Automation Component rests on clear advantages: omron quality assurance. Voltage rating 12-24V DC, covers most industrial installation scenarios.
Specifications at a Glance
The table below summarises the main technical parameters of the Omron R88D-1SN02H-ECT. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Industry Use Cases
The Omron R88D-1SN02H-ECT Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron R88D-1SN02H-ECT is designed with exactly those conditions in mind.
Installation Checklist
Installation is straightforward: determine the mounting location, secure the sensor with screws or bracket, connect the cable to the correct terminals, and adjust the target distance. The Omron R88D-1SN02H-ECT Industrial Automation Component requires no specialised tools.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Omron R88D-1SN02H-ECT: Long-Term Value
Omron’s reputation in automation did not come from clever advertising. It came from decades of sensors performing reliably in factories worldwide. The R88D-1SN02H-ECT Industrial Automation Component is a current embodiment of that engineering culture.
Frequently Asked Questions
What applications is the Omron R88D-1SN02H-ECT designed for?
The Omron R88D-1SN02H-ECT Industrial Automation Component is designed primarily for industrial automation, control systems, machine building.
What voltage does the Omron R88D-1SN02H-ECT operate at?
The Omron R88D-1SN02H-ECT operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron R88D-1SN02H-ECT?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron R88D-1SN02H-ECT Industrial Automation Component is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron R88D-1SN02H-ECT have?
The Omron R88D-1SN02H-ECT Industrial Automation Component has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron R88D-1SN02H-ECT in Europe?
The Omron R88D-1SN02H-ECT Industrial Automation Component is available through Omron’s authorised European distributors.