Omron R88A-CR1A010CF-E Industrial Automation Component: Technical Guide and Application Manual
Industrial automation decisions are not easily reversed. Choosing the Omron R88A-CR1A010CF-E Industrial Automation Component for industrial automation applicationsat 12-24V DC is the kind of decision that stays looking smart years later.
Omron’s sensor portfolio is not limited to photoelectric and inductive technologies. The company’s Omron Sensor range also covers capacitive, ultrasonic and laser sensors — often integrated into the same panel alongside units like this one.
What Is the Omron R88A-CR1A010CF-E Industrial Automation Component?
The Omron R88A-CR1A010CF-E is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
What separates this sensor from generic alternatives is in the details: omron quality assurance. Operating at 12-24V DC, it integrates straightforwardly into standard industrial automation systems.
Technical Specifications
The table below summarises the main technical parameters of the Omron R88A-CR1A010CF-E. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Where Is It Used?
The Omron R88A-CR1A010CF-E Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron R88A-CR1A010CF-E is designed with exactly those conditions in mind.
Installation Notes
A few installation details make a tangible difference with the Omron R88A-CR1A010CF-E Industrial Automation Component. Mount the sensor at a location free from vibration. Keep the cable route away from sharp edges. Adjust the target distance to operate at 80% of the nominal sensing range.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Choose the Omron {c}?
The case for choosing the Omron R88A-CR1A010CF-E Industrial Automation Component is not built on marketing alone. It rests on measurable factors: tested sensing distance, IP67 protection rating certification, and a global support network.
Frequently Asked Questions
How do I install the Omron R88A-CR1A010CF-E?
Mount the Omron R88A-CR1A010CF-E Industrial Automation Component using a mounting bracket to a stable surface, make cable connections, and adjust the target distance.
What is the service life of the Omron R88A-CR1A010CF-E?
As the Omron R88A-CR1A010CF-E Industrial Automation Component uses semiconductor technology with no moving mechanical parts, it has a very long service life.
Is the Omron R88A-CR1A010CF-E sensitive to inductive loads?
The Omron R88A-CR1A010CF-E Industrial Automation Component includes short-circuit and overcurrent protection in its output circuit.
Is the Omron R88A-CR1A010CF-E RoHS compliant?
Omron products conform to RoHS Directive requirements. Specific compliance documentation can be requested from authorised distributors.
What periodic maintenance does the Omron R88A-CR1A010CF-E require?
Keep the sensor lens clean, check cable connections, and ensure the mounting screw is tight.