Omron OMR-E3JK-DR12-C Industrial Automation Component: Technical Guide and Application Manual
Control system design involves dozens of sensor choices, each one a small bet on reliability. The Omron OMR-E3JK-DR12-C Industrial Automation Component is a safe bet — proven in industrial automation environmentswith operating voltage 12-24V DC.
For projects where sensing and control decisions must be made together, Omron’s Omron Sensor products are a natural companion to this unit. Both families are built to the same quality standards.
Omron OMR-E3JK-DR12-C Overview
The Omron OMR-E3JK-DR12-C is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
From a technical standpoint, the Omron OMR-E3JK-DR12-C offers omron quality assurance. Supply voltage 12-24V DC delivers reliable field performance.
Key Technical Parameters
The table below summarises the main technical parameters of the Omron OMR-E3JK-DR12-C. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Typical Application Areas
The Omron OMR-E3JK-DR12-C Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron OMR-E3JK-DR12-C is designed with exactly those conditions in mind.
Mounting and Commissioning
Installation is straightforward: determine the mounting location, secure the sensor with screws or bracket, connect the cable to the correct terminals, and adjust the target distance. The Omron OMR-E3JK-DR12-C Industrial Automation Component requires no specialised tools.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
The Case for Choosing Omron
Lower-priced alternatives exist, and some perform adequately in light-duty applications. But in continuous-operation environments, the Omron OMR-E3JK-DR12-C Industrial Automation Component consistently outlasts them — because every detail has been optimised for industrial use.
Frequently Asked Questions
What applications is the Omron OMR-E3JK-DR12-C designed for?
The Omron OMR-E3JK-DR12-C Industrial Automation Component is designed primarily for industrial automation, control systems, machine building.
What voltage does the Omron OMR-E3JK-DR12-C operate at?
The Omron OMR-E3JK-DR12-C operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron OMR-E3JK-DR12-C?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron OMR-E3JK-DR12-C Industrial Automation Component is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron OMR-E3JK-DR12-C have?
The Omron OMR-E3JK-DR12-C Industrial Automation Component has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron OMR-E3JK-DR12-C in Europe?
The Omron OMR-E3JK-DR12-C Industrial Automation Component is available through Omron’s authorised European distributors.