Omron MYQ4N 220/240VAC Power Relay: Technical Guide and Application Manual
Industrial automation decisions are not easily reversed. Choosing the Omron MYQ4N 220/240VAC Power Relay for power distribution applicationsat 220/240V AC is the kind of decision that stays looking smart years later.
Omron Omron Sensor products are commonly found on the same mounting panel as this unit. The shared design philosophy means a system built with multiple Omron product families has consistency.
What Is the Omron MYQ4N 220/240VAC Power Relay?
The Omron MYQ4N 220/240VAC is a Power Relay rated at 220/240V AC designed to reliably handle power distribution applications. Key engineering features include high reliability, 4-pole, led indicator.
What separates this sensor from generic alternatives is in the details: high reliability, 4-pole, led indicator. Operating at 220/240V AC, it integrates straightforwardly into standard industrial automation systems.
Technical Specifications
The table below summarises the main technical parameters of the Omron MYQ4N 220/240VAC. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Power Relay |
| Operating Voltage | 220/240V AC |
| Output Type | 4-pole (4PDT) |
| Output Current | 10 A |
| Key Features | High reliability, 4-pole, LED indicator |
| Mounting | DIN rail (with socket) |
| Lifetime | 10 million operations |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | PYF sockets |
Where Is It Used?
The Omron MYQ4N 220/240VAC Power Relay is commonly specified for the following applications:
- Power distribution
- Motor control
- Industrial panel
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron MYQ4N 220/240VAC is designed with exactly those conditions in mind.
Installation Notes
Commissioning the Omron MYQ4N 220/240VAC Power Relay is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Choose the Omron {c}?
The case for choosing the Omron MYQ4N 220/240VAC Power Relay is not built on marketing alone. It rests on measurable factors: tested sensing distance, IP67 protection rating certification, and a global support network.
Frequently Asked Questions
What applications is the Omron MYQ4N 220/240VAC designed for?
The Omron MYQ4N 220/240VAC Power Relay is designed primarily for power distribution, motor control, industrial panel.
What voltage does the Omron MYQ4N 220/240VAC operate at?
The Omron MYQ4N 220/240VAC operates at 220/240V AC supply voltage.
What is the sensing distance of the Omron MYQ4N 220/240VAC?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron MYQ4N 220/240VAC Power Relay is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron MYQ4N 220/240VAC have?
The Omron MYQ4N 220/240VAC Power Relay has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron MYQ4N 220/240VAC in Europe?
The Omron MYQ4N 220/240VAC Power Relay is available through Omron’s authorised European distributors.