Omron MY4N-D2-GS 24VDC Plug-in Power Relay Guide

The Omron MY4N-D2-GS 24VDC plug-in power relay is a compact 4PDT electromechanical relay for 24 VDC control systems. It is commonly used in industrial automation, machine panels, PLC interface circuits, and auxiliary control applications where one DC signal must operate several isolated contacts.

Omron MY4N-D2-GS 24VDC Technical Characteristics

This relay uses a 24 VDC coil and four changeover contacts. The MY4N-D2 design includes an LED operation indicator and a built-in diode for coil surge absorption. The diode is especially relevant in DC control circuits because it helps clamp reverse voltage generated when the relay coil is switched off. This protects nearby semiconductor outputs, PLC cards, and control electronics from unwanted voltage spikes.

The contact structure is 4PDT, also known as 4 Form C. This allows one relay to transfer four separate circuits, making it useful for signal distribution, control logic, alarm outputs, status feedback, and interlocking. The plug-in terminal structure allows the relay to be installed into a compatible 14-pin socket, supporting easier service and panel standardization.

Omron MY4N-D2-GS 24VDC Why 24 VDC Is Widely Used

Many modern control panels use 24 VDC because it is compatible with PLC outputs, safety-related auxiliary circuits, sensors, and industrial interface modules. The Omron MY4N-D2-GS 24VDC relay fits naturally into this environment, offering mechanical isolation between the control side and load side while maintaining a clear visual indication of coil operation.

Application Examples

This relay can be used in conveyor panels, packaging machines, process equipment, pump stations, control cabinets, and test systems. It is suitable for designers who need a practical relay for moderate control loads rather than a high-current power contactor. Its diode suppression also makes it a sensible option when the coil is driven by transistor outputs.

Engineering Considerations

Because the model includes a diode, polarity must be observed during wiring. Reversing polarity may prevent correct operation or damage the circuit. Engineers should confirm socket type, coil polarity, load current, switching voltage, and load behavior. Inductive loads may require additional suppression on the contact side depending on the circuit design.

For related Omron components, visit more information about Omron.

FAQ

What is the Omron MY4N-D2-GS 24VDC relay used for?

It is used for 24 VDC control circuits where multiple independent contacts must be switched from one relay coil signal.

What does D2 mean in this relay type?

D2 indicates a built-in diode for coil surge absorption. This is useful in DC relay circuits to help control reverse voltage when the coil turns off.

Does this relay have polarity?

Yes. Because it includes a diode, coil polarity should be followed according to the wiring diagram and datasheet.

Is it suitable for PLC output circuits?

Yes, it is commonly suitable for PLC-driven relay interfaces when voltage, current, polarity, and protection requirements are correctly matched.

What does 4PDT provide in practical terms?

It provides four independent changeover contacts, allowing one relay to switch several signals or control paths at the same time.

Can it be used instead of an AC coil relay?

No. This model has a 24 VDC coil. AC coil applications require a relay with the correct AC coil voltage.