Omron MY4IN-GS-R DC48 Power Relay: Technical Guide, Applications and Installation
Control system design involves dozens of component choices, each one a small bet on reliability. The Omron MY4IN-GS-R DC48 Power Relay is a safe bet — proven in remote control panels environmentsoperating at 48V DC, backed by one of the most recognised names in industrial automation.
Omron’s product range extends well beyond relays and switches. The company’s Omron Sensor portfolio covers inductive, photoelectric, and capacitive detection technologies — often integrated into the same panel alongside units like this one, creating a fully cohesive control system.
Omron MY4IN-GS-R DC48 Overview
The Omron MY4IN-GS-R DC48 is a Power Relay rated at 48V DC, built to handle remote control panels reliably over a long service life. Key engineering features include gs rail compatible, retaining clip, led indicator, and the unit mounts via gs din rail socket.
From a technical standpoint, the Omron MY4IN-GS-R DC48 offers gs rail compatible, retaining clip, led indicator. Engineers who have worked with the previous generation will notice the same attention to detail that made the earlier models popular— with 48V DC compatibility built in.
Key Technical Parameters
The table below summarises the main technical parameters of the Omron MY4IN-GS-R DC48. For full specifications, always refer to the official Omron product datasheet, as application-specific derating may apply.
| Parameter | Value |
|---|---|
| Product Type | Power Relay |
| Coil / Operating Voltage | 48V DC |
| Contacts / Channels | 4-pole (4PDT) |
| Contact Current | 10 A |
| Key Features | GS rail compatible, retaining clip, LED indicator |
| Mounting | GS DIN rail socket |
| Mechanical Lifetime | 10 million mechanical operations |
| Operating Temperature | -25 °C to +70 °C |
| Compatible Socket | GS series socket |
Typical Application Areas
The Omron MY4IN-GS-R DC48 Power Relay is commonly specified for the following applications:
- Remote control panels
- Machine automation systems
Across these use cases, the consistent thread is a need for dependable switching over a large number of operations, often in environments where an unplanned fault would create significant disruption. The Omron MY4IN-GS-R DC48 is designed with exactly those conditions in mind.
The Omron MY4IN-GS-R DC48 is designed to be used with GS series socket. Using a non-compatible socket model can compromise contact pressure and reduce overall service life, so always verify socket compatibility before ordering.
Mounting and Commissioning
The Omron MY4IN-GS-R DC48 Power Relay follows standard DIN rail mounting practice. Before inserting the unit into its socket or fixing it to the rail, always verify the circuit is fully de-energised. Check that cable cross-sections are appropriate for the load, and after commissioning, mark the panel clearly with the device type and rated voltage for future maintenance reference.
For ongoing maintenance, periodically inspect for contact discolouration, check terminal screws for loosening, and look for any signs of heat stress on the housing. Catching these early avoids the much larger cost of an unplanned production stop.
The Case for Choosing Omron
Alternatives exist at lower price points, and some perform adequately in light-duty applications. But in continuous-operation environments, the Omron MY4IN-GS-R DC48 Power Relay consistently outlasts them — not because of a single dramatic feature, but because every detail, from contact material to housing design, has been optimised for the conditions that industrial use actually creates.
Frequently Asked Questions
What is the difference between the Omron MY4IN-GS-R DC48 and a mechanical contactor?
The Omron MY4IN-GS-R DC48 Power Relay is designed for panel-level signal and load switching at the current ratings specified. A contactor is built for direct motor starting at higher currents. For applications within the rated capacity of the Omron MY4IN-GS-R DC48, it offers faster switching, longer life, and a smaller footprint than a contactor.
How does temperature affect the Omron MY4IN-GS-R DC48?
Like all electromechanical devices, performance can be affected at the extremes of the operating temperature range. The Omron MY4IN-GS-R DC48 is rated for use across a defined ambient temperature range — consult the datasheet for precise limits and any derating requirements at elevated temperatures.
Can I mount multiple Omron MY4IN-GS-R DC48 units side by side on a DIN rail?
Yes. The Omron MY4IN-GS-R DC48 Power Relay is designed for standard DIN rail assembly with adjacent units. Ensure adequate total load current is within the rail and busbar capacity, and that enclosure ventilation is sufficient for the combined heat dissipation.
Does the Omron MY4IN-GS-R DC48 include a test facility?
Depending on the model variant, some Omron relay sockets include a manual test button or push-to-test function. Check the specific socket model specified for the Omron MY4IN-GS-R DC48 to confirm whether this feature is available.
How long is the warranty on the Omron MY4IN-GS-R DC48?
Omron provides a standard 12-month manufacturer warranty on products purchased through authorised distributors. Extended warranty options may be available — contact your local Omron distributor for details.