Omron G3NA-220B-UTU 100-240VAC Single Phase SSR: Technical Guide, Applications and Installation
The Omron G3NA-220B-UTU 100-240VAC is a Single Phase SSR developed for engineers who understand that the cost of an unplanned stop far exceeds the cost of a quality component. Rated at 100-240V AC, it addresses real challenges found in AC control circuits without overcomplicating installation or maintenance.
Omron’s strength lies in offering complete automation subsystems rather than isolated components. The Omron Sensor lineup complements the relay and switch range by providing the detection layer, so the entire signal chain — from physical event to control output — stays within one trusted supplier.
Understanding the Omron G3NA-220B-UTU 100-240VAC Single Phase SSR
The Omron G3NA-220B-UTU 100-240VAC is a Single Phase SSR rated at 100-240V AC, built to handle AC control circuits reliably over a long service life. Key engineering features include ac control input, zero-cross switching, optical isolation, and the unit mounts via heatsink or panel.
Technically, the Omron G3NA-220B-UTU 100-240VAC delivers ac control input, zero-cross switching, optical isolation. Matching the 100-240V AC control bus requires no extra hardware, which keeps commissioning time short and the panel design clean.
Core Specifications
The table below summarises the main technical parameters of the Omron G3NA-220B-UTU 100-240VAC. For full specifications, always refer to the official Omron product datasheet, as application-specific derating may apply.
| Parameter | Value |
|---|---|
| Product Type | Single Phase SSR |
| Coil / Operating Voltage | 100-240V AC |
| Contacts / Channels | 1-phase |
| Contact Current | 20 A |
| Key Features | AC control input, zero-cross switching, optical isolation |
| Mounting | Heatsink or panel |
| Mechanical Lifetime | Semiconductor |
| Operating Temperature | -30 °C to +80 °C |
Application Scenarios
The Omron G3NA-220B-UTU 100-240VAC Single Phase SSR is commonly specified for the following applications:
- Ac control circuits
- Single-phase heater and motor control
Across these use cases, the consistent thread is a need for dependable switching over a large number of operations, often in environments where an unplanned fault would create significant disruption. The Omron G3NA-220B-UTU 100-240VAC is designed with exactly those conditions in mind.
Getting It Right at Installation
Commissioning the Omron G3NA-220B-UTU 100-240VAC Single Phase SSR is straightforward. Snap or screw it into position on the DIN rail, connect cables at the correct terminals, and confirm polarity where applicable. During the first powered test, verify that the indicator LED (where fitted) responds correctly and that the output contacts behave as expected under a controlled test load.
For ongoing maintenance, periodically inspect for contact discolouration, check terminal screws for loosening, and look for any signs of heat stress on the housing. Catching these early avoids the much larger cost of an unplanned production stop.
Why Engineers Choose Omron
Specifying the Omron G3NA-220B-UTU 100-240VAC Single Phase SSR also means specifying into an ecosystem. Omron’s portfolio covers relays, sensors, PLCs, power supplies, and more — all engineered to work together. When a component does eventually need replacing, compatibility with the rest of the system is guaranteed, which is something off-brand alternatives simply cannot offer.
Frequently Asked Questions
What applications is the Omron G3NA-220B-UTU 100-240VAC designed for?
The Omron G3NA-220B-UTU 100-240VAC Single Phase SSR is designed primarily for AC control circuits, single-phase heater and motor control. Its construction and contact ratings make it well suited to both continuous-duty and intermittent switching in these environments.
What coil voltage does the Omron G3NA-220B-UTU 100-240VAC use?
The Omron G3NA-220B-UTU 100-240VAC operates at a coil voltage of 100-240V AC. Always verify that your control circuit voltage matches before installation.
Does the Omron G3NA-220B-UTU 100-240VAC require a specific socket?
Yes, Omron designs its relay families to work with specific matched sockets. Using a non-specified socket can affect contact pressure and shorten service life. Refer to the Omron G3NA-220B-UTU 100-240VAC datasheet for the compatible socket model.
What certifications does the Omron G3NA-220B-UTU 100-240VAC carry?
Omron products are manufactured to CE and UL standards, with additional certifications depending on the model. Product-specific certification details are available in the official Omron datasheet and on the product label.
Where can I source the Omron G3NA-220B-UTU 100-240VAC in Europe?
The Omron G3NA-220B-UTU 100-240VAC Single Phase SSR is available through Omron’s authorised European distributors. Purchasing through official channels ensures product authenticity, full warranty coverage, and access to technical support.