Omron E3T-ST14 2M Industrial Sensor: Technical Guide and Application Manual
Selecting a sensor requires more than just checking the sensing distance. The Omron E3T-ST14 2M is a Industrial Sensor thatoperates at 12-24V DC and stands out in industrial detection applications with field-tested reliability.
Many engineers working with this product also specify other Omron Omron Sensor models on the same project. The shared ecosystem means cable standards and mounting accessories are compatible.
What Is the Omron E3T-ST14 2M Industrial Sensor?
The Omron E3T-ST14 2M is a Industrial Sensor rated at 12-24V DC, with 2 m cable length, designed to reliably handle industrial detection applications. Key engineering features include omron quality assurance, cable 2 m.
What separates this sensor from generic alternatives is in the details: omron quality assurance, cable 2 m. Operating at 12-24V DC, with 2 m cable, it integrates straightforwardly into standard industrial automation systems.
Technical Specifications
The table below summarises the main technical parameters of the Omron E3T-ST14 2M. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Sensor |
| Operating Voltage | 12-24V DC |
| Cable Length | 2 m |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance, cable 2 m |
| Mounting | Screw mount |
| Lifetime | Semiconductor |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting bracket |
Where Is It Used?
The Omron E3T-ST14 2M Industrial Sensor is commonly specified for the following applications:
- Industrial detection
- Automation systems
- Position control
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E3T-ST14 2M is designed with exactly those conditions in mind.
Installation Notes
Installation is straightforward: determine the mounting location, secure the sensor with screws or bracket, connect the cable to the correct terminals, and adjust the target distance. The Omron E3T-ST14 2M Industrial Sensor requires no specialised tools.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Choose the Omron {c}?
The case for choosing the Omron E3T-ST14 2M Industrial Sensor is not built on marketing alone. It rests on measurable factors: tested sensing distance, IP67 protection rating certification, and a global support network.
Frequently Asked Questions
What applications is the Omron E3T-ST14 2M designed for?
The Omron E3T-ST14 2M Industrial Sensor is designed primarily for industrial detection, automation systems, position control.
What voltage does the Omron E3T-ST14 2M operate at?
The Omron E3T-ST14 2M operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron E3T-ST14 2M?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron E3T-ST14 2M Industrial Sensor is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron E3T-ST14 2M have?
The Omron E3T-ST14 2M Industrial Sensor has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron E3T-ST14 2M in Europe?
The Omron E3T-ST14 2M Industrial Sensor is available through Omron’s authorised European distributors.