Omron E3T-FD11 2M Industrial Sensor: Technical Guide and Application Manual
Some sensors look good on a catalogue page but disappoint in the field. The Omron E3T-FD11 2M Industrial Sensor is not one of them — 12-24V DC operating voltage, IP67 protection and proven durability in industrial detection make it ready for real-world conditions.
In a well-designed automation system, all components of the sensing layer must work in harmony. Omron’s Omron Sensor family is engineered to feed signals to relays and controllers from the same manufacturer.
About the Omron E3T-FD11 2M Industrial Sensor
The Omron E3T-FD11 2M is a Industrial Sensor rated at 12-24V DC, with 2 m cable length, designed to reliably handle industrial detection applications. Key engineering features include omron quality assurance, cable 2 m.
The engineering case for the Omron E3T-FD11 2M Industrial Sensor rests on clear advantages: omron quality assurance, cable 2 m. Voltage rating 12-24V DC, factory-fitted 2 m cable, covers most industrial installation scenarios.
Specifications at a Glance
The table below summarises the main technical parameters of the Omron E3T-FD11 2M. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Sensor |
| Operating Voltage | 12-24V DC |
| Cable Length | 2 m |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance, cable 2 m |
| Mounting | Screw mount |
| Lifetime | Semiconductor |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting bracket |
Industry Use Cases
The Omron E3T-FD11 2M Industrial Sensor is commonly specified for the following applications:
- Industrial detection
- Automation systems
- Position control
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E3T-FD11 2M is designed with exactly those conditions in mind.
Installation Checklist
When mounting the Omron E3T-FD11 2M Industrial Sensor in a system, pay attention to three things: the mounting location must be vibration-free; cable tension must not be excessive; target distance must stay within the nominal range.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Omron E3T-FD11 2M: Long-Term Value
Omron’s reputation in automation did not come from clever advertising. It came from decades of sensors performing reliably in factories worldwide. The E3T-FD11 2M Industrial Sensor is a current embodiment of that engineering culture.
Frequently Asked Questions
How do I install the Omron E3T-FD11 2M?
Mount the Omron E3T-FD11 2M Industrial Sensor using a mounting bracket to a stable surface, make cable connections, and adjust the target distance.
What is the service life of the Omron E3T-FD11 2M?
As the Omron E3T-FD11 2M Industrial Sensor uses semiconductor technology with no moving mechanical parts, it has a very long service life.
Is the Omron E3T-FD11 2M sensitive to inductive loads?
The Omron E3T-FD11 2M Industrial Sensor includes short-circuit and overcurrent protection in its output circuit.
Is the Omron E3T-FD11 2M RoHS compliant?
Omron products conform to RoHS Directive requirements. Specific compliance documentation can be requested from authorised distributors.
What periodic maintenance does the Omron E3T-FD11 2M require?
Keep the sensor lens clean, check cable connections, and ensure the mounting screw is tight.