Omron E3T-CD13 2M Industrial Sensor: Technical Guide and Application Manual
A sensor failure on a production line can mean hours of downtime. The Omron E3T-CD13 2M Industrial Sensor — rated at 12-24V DC — is designed to prevent such unplanned stops in critical applications like industrial detection.
Omron’s sensor portfolio is not limited to photoelectric and inductive technologies. The company’s Omron Sensor range also covers capacitive, ultrasonic and laser sensors — often integrated into the same panel alongside units like this one.
Omron E3T-CD13 2M Overview
The Omron E3T-CD13 2M is a Industrial Sensor rated at 12-24V DC, with 2 m cable length, designed to reliably handle industrial detection applications. Key engineering features include omron quality assurance, cable 2 m.
From a technical standpoint, the Omron E3T-CD13 2M offers omron quality assurance, cable 2 m. Supply voltage 12-24V DC, 2 m cable length delivers reliable field performance.
Key Technical Parameters
The table below summarises the main technical parameters of the Omron E3T-CD13 2M. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Sensor |
| Operating Voltage | 12-24V DC |
| Cable Length | 2 m |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance, cable 2 m |
| Mounting | Screw mount |
| Lifetime | Semiconductor |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting bracket |
Typical Application Areas
The Omron E3T-CD13 2M Industrial Sensor is commonly specified for the following applications:
- Industrial detection
- Automation systems
- Position control
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E3T-CD13 2M is designed with exactly those conditions in mind.
Mounting and Commissioning
Commissioning the Omron E3T-CD13 2M Industrial Sensor is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
The Case for Choosing Omron
Lower-priced alternatives exist, and some perform adequately in light-duty applications. But in continuous-operation environments, the Omron E3T-CD13 2M Industrial Sensor consistently outlasts them — because every detail has been optimised for industrial use.
Frequently Asked Questions
What applications is the Omron E3T-CD13 2M designed for?
The Omron E3T-CD13 2M Industrial Sensor is designed primarily for industrial detection, automation systems, position control.
What voltage does the Omron E3T-CD13 2M operate at?
The Omron E3T-CD13 2M operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron E3T-CD13 2M?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron E3T-CD13 2M Industrial Sensor is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron E3T-CD13 2M have?
The Omron E3T-CD13 2M Industrial Sensor has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron E3T-CD13 2M in Europe?
The Omron E3T-CD13 2M Industrial Sensor is available through Omron’s authorised European distributors.