Omron E3JK-RR12-SM-10 Industrial Automation Component: Technical Guide and Application Manual
Selecting a sensor requires more than just checking the sensing distance. The Omron E3JK-RR12-SM-10 is a Industrial Automation Component thatoperates at 12-24V DC and stands out in industrial automation applications with field-tested reliability.
Omron Omron Sensor products are commonly found on the same mounting panel as this unit. The shared design philosophy means a system built with multiple Omron product families has consistency.
What Is the Omron E3JK-RR12-SM-10 Industrial Automation Component?
The Omron E3JK-RR12-SM-10 is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
What separates this sensor from generic alternatives is in the details: omron quality assurance. Operating at 12-24V DC, it integrates straightforwardly into standard industrial automation systems.
Technical Specifications
The table below summarises the main technical parameters of the Omron E3JK-RR12-SM-10. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | Relay output |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Where Is It Used?
The Omron E3JK-RR12-SM-10 Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E3JK-RR12-SM-10 is designed with exactly those conditions in mind.
Installation Notes
Installation is straightforward: determine the mounting location, secure the sensor with screws or bracket, connect the cable to the correct terminals, and adjust the target distance. The Omron E3JK-RR12-SM-10 Industrial Automation Component requires no specialised tools.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Choose the Omron {c}?
The case for choosing the Omron E3JK-RR12-SM-10 Industrial Automation Component is not built on marketing alone. It rests on measurable factors: tested sensing distance, IP67 protection rating certification, and a global support network.
Frequently Asked Questions
What applications is the Omron E3JK-RR12-SM-10 designed for?
The Omron E3JK-RR12-SM-10 Industrial Automation Component is designed primarily for industrial automation, control systems, machine building.
What voltage does the Omron E3JK-RR12-SM-10 operate at?
The Omron E3JK-RR12-SM-10 operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron E3JK-RR12-SM-10?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron E3JK-RR12-SM-10 Industrial Automation Component is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron E3JK-RR12-SM-10 have?
The Omron E3JK-RR12-SM-10 Industrial Automation Component has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron E3JK-RR12-SM-10 in Europe?
The Omron E3JK-RR12-SM-10 Industrial Automation Component is available through Omron’s authorised European distributors.