Omron E3FA-DP26 Industrial Sensor: Technical Guide and Application Manual
Ask an automation engineer which sensors they trust, and Omron comes up first. The E3FA-DP26 Industrial Sensorwith supply voltage 12-24V DC, designed for industrial detection applications, built to run trouble-free for years.
Omron’s sensor portfolio is not limited to photoelectric and inductive technologies. The company’s Omron Sensor range also covers capacitive, ultrasonic and laser sensors — often integrated into the same panel alongside units like this one.
Omron E3FA-DP26 — Product Profile
The Omron E3FA-DP26 is a Industrial Sensor rated at 12-24V DC designed to reliably handle industrial detection applications. Key engineering features include omron quality assurance.
In the field, omron quality assurance stands out immediately. 12-24V DC supply voltage aligns with industrial automation standards.
Technical Data Summary
The table below summarises the main technical parameters of the Omron E3FA-DP26. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Sensor |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Mounting | Screw mount |
| Lifetime | Semiconductor |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting bracket |
Where This Product Fits
The Omron E3FA-DP26 Industrial Sensor is commonly specified for the following applications:
- Industrial detection
- Automation systems
- Position control
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E3FA-DP26 is designed with exactly those conditions in mind.
Practical Installation Tips
Commissioning the Omron E3FA-DP26 Industrial Sensor is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Performance You Can Rely On
From a total cost of ownership perspective, the Omron E3FA-DP26 Industrial Sensor makes financial sense even when its purchase price is higher than alternatives. Reduced unplanned downtime and fewer replacement cycles add up to a clear advantage.
Frequently Asked Questions
What applications is the Omron E3FA-DP26 designed for?
The Omron E3FA-DP26 Industrial Sensor is designed primarily for industrial detection, automation systems, position control.
What voltage does the Omron E3FA-DP26 operate at?
The Omron E3FA-DP26 operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron E3FA-DP26?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron E3FA-DP26 Industrial Sensor is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron E3FA-DP26 have?
The Omron E3FA-DP26 Industrial Sensor has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron E3FA-DP26 in Europe?
The Omron E3FA-DP26 Industrial Sensor is available through Omron’s authorised European distributors.