Omron E2E-X4MD1 2M Inductive Proximity Sensor: Technical Guide and Application Manual
Industrial automation decisions are not easily reversed. Choosing the Omron E2E-X4MD1 2M Inductive Proximity Sensor for long-range metal detection applicationsat 12-24V DC is the kind of decision that stays looking smart years later.
Omron Omron Sensor products are commonly found on the same mounting panel as this unit. The shared design philosophy means a system built with multiple Omron product families has consistency.
What Is the Omron E2E-X4MD1 2M Inductive Proximity Sensor?
The Omron E2E-X4MD1 2M is a Inductive Proximity Sensor rated at 12-24V DC, with 2 m cable length, designed to reliably handle long-range metal detection applications. Key engineering features include m12 body, 4 mm sensing distance, cable 2 m, high precision, ip67.
What separates this sensor from generic alternatives is in the details: m12 body, 4 mm sensing distance, cable 2 m, high precision, ip67. Operating at 12-24V DC, with 2 m cable, it integrates straightforwardly into standard industrial automation systems.
Technical Specifications
The table below summarises the main technical parameters of the Omron E2E-X4MD1 2M. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Inductive Proximity Sensor |
| Operating Voltage | 12-24V DC |
| Cable Length | 2 m |
| Output Type | NPN/PNP |
| Output Current | 200 mA |
| Key Features | M12 body, 4 mm sensing distance, cable 2 m, high precision, IP67 |
| Mounting | Screw mount |
| Lifetime | Semiconductor |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting bracket |
Where Is It Used?
The Omron E2E-X4MD1 2M Inductive Proximity Sensor is commonly specified for the following applications:
- Long-range metal detection
- Conveyor systems
- Industrial automation
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E2E-X4MD1 2M is designed with exactly those conditions in mind.
Installation Notes
Commissioning the Omron E2E-X4MD1 2M Inductive Proximity Sensor is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Choose the Omron {c}?
The case for choosing the Omron E2E-X4MD1 2M Inductive Proximity Sensor is not built on marketing alone. It rests on measurable factors: tested sensing distance, IP67 protection rating certification, and a global support network.
Frequently Asked Questions
What applications is the Omron E2E-X4MD1 2M designed for?
The Omron E2E-X4MD1 2M Inductive Proximity Sensor is designed primarily for long-range metal detection, conveyor systems, industrial automation.
What voltage does the Omron E2E-X4MD1 2M operate at?
The Omron E2E-X4MD1 2M operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron E2E-X4MD1 2M?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron E2E-X4MD1 2M Inductive Proximity Sensor is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron E2E-X4MD1 2M have?
The Omron E2E-X4MD1 2M Inductive Proximity Sensor has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron E2E-X4MD1 2M in Europe?
The Omron E2E-X4MD1 2M Inductive Proximity Sensor is available through Omron’s authorised European distributors.