Omron E2E-X4C112-M1 Inductive Proximity Sensor: Technical Guide and Application Manual
Control system design involves dozens of sensor choices, each one a small bet on reliability. The Omron E2E-X4C112-M1 Inductive Proximity Sensor is a safe bet — proven in long-range metal detection environmentswith operating voltage 12-24V DC.
Many engineers working with this product also specify other Omron Omron Sensor models on the same project. The shared ecosystem means cable standards and mounting accessories are compatible.
Omron E2E-X4C112-M1 Overview
The Omron E2E-X4C112-M1 is a Inductive Proximity Sensor rated at 12-24V DC designed to reliably handle long-range metal detection applications. Key engineering features include m12 body, 4 mm sensing distance, high precision, ip67.
From a technical standpoint, the Omron E2E-X4C112-M1 offers m12 body, 4 mm sensing distance, high precision, ip67. Supply voltage 12-24V DC delivers reliable field performance.
Key Technical Parameters
The table below summarises the main technical parameters of the Omron E2E-X4C112-M1. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Inductive Proximity Sensor |
| Operating Voltage | 12-24V DC |
| Output Type | NPN output |
| Output Current | 200 mA |
| Key Features | M12 body, 4 mm sensing distance, high precision, IP67 |
| Mounting | Screw mount |
| Lifetime | Semiconductor |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting bracket |
Typical Application Areas
The Omron E2E-X4C112-M1 Inductive Proximity Sensor is commonly specified for the following applications:
- Long-range metal detection
- Conveyor systems
- Industrial automation
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E2E-X4C112-M1 is designed with exactly those conditions in mind.
Mounting and Commissioning
Installation is straightforward: determine the mounting location, secure the sensor with screws or bracket, connect the cable to the correct terminals, and adjust the target distance. The Omron E2E-X4C112-M1 Inductive Proximity Sensor requires no specialised tools.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
The Case for Choosing Omron
Lower-priced alternatives exist, and some perform adequately in light-duty applications. But in continuous-operation environments, the Omron E2E-X4C112-M1 Inductive Proximity Sensor consistently outlasts them — because every detail has been optimised for industrial use.
Frequently Asked Questions
What applications is the Omron E2E-X4C112-M1 designed for?
The Omron E2E-X4C112-M1 Inductive Proximity Sensor is designed primarily for long-range metal detection, conveyor systems, industrial automation.
What voltage does the Omron E2E-X4C112-M1 operate at?
The Omron E2E-X4C112-M1 operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron E2E-X4C112-M1?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron E2E-X4C112-M1 Inductive Proximity Sensor is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron E2E-X4C112-M1 have?
The Omron E2E-X4C112-M1 Inductive Proximity Sensor has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron E2E-X4C112-M1 in Europe?
The Omron E2E-X4C112-M1 Inductive Proximity Sensor is available through Omron’s authorised European distributors.