Omron E2E-X4B3D12-M1 Inductive Proximity Sensor: Technical Guide and Application Manual
Ask an automation engineer which sensors they trust, and Omron comes up first. The E2E-X4B3D12-M1 Inductive Proximity Sensorwith supply voltage 12-24V DC, designed for long-range metal detection applications, built to run trouble-free for years.
Omron Omron Sensor products are commonly found on the same mounting panel as this unit. The shared design philosophy means a system built with multiple Omron product families has consistency.
Omron E2E-X4B3D12-M1 — Product Profile
The Omron E2E-X4B3D12-M1 is a Inductive Proximity Sensor rated at 12-24V DC designed to reliably handle long-range metal detection applications. Key engineering features include m12 body, 4 mm sensing distance, high precision, ip67.
In the field, m12 body, 4 mm sensing distance, high precision, ip67 stands out immediately. 12-24V DC supply voltage aligns with industrial automation standards.
Technical Data Summary
The table below summarises the main technical parameters of the Omron E2E-X4B3D12-M1. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Inductive Proximity Sensor |
| Operating Voltage | 12-24V DC |
| Output Type | NPN output |
| Output Current | 200 mA |
| Key Features | M12 body, 4 mm sensing distance, high precision, IP67 |
| Mounting | Screw mount |
| Lifetime | Semiconductor |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting bracket |
Where This Product Fits
The Omron E2E-X4B3D12-M1 Inductive Proximity Sensor is commonly specified for the following applications:
- Long-range metal detection
- Conveyor systems
- Industrial automation
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E2E-X4B3D12-M1 is designed with exactly those conditions in mind.
Practical Installation Tips
Commissioning the Omron E2E-X4B3D12-M1 Inductive Proximity Sensor is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Performance You Can Rely On
From a total cost of ownership perspective, the Omron E2E-X4B3D12-M1 Inductive Proximity Sensor makes financial sense even when its purchase price is higher than alternatives. Reduced unplanned downtime and fewer replacement cycles add up to a clear advantage.
Frequently Asked Questions
What applications is the Omron E2E-X4B3D12-M1 designed for?
The Omron E2E-X4B3D12-M1 Inductive Proximity Sensor is designed primarily for long-range metal detection, conveyor systems, industrial automation.
What voltage does the Omron E2E-X4B3D12-M1 operate at?
The Omron E2E-X4B3D12-M1 operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron E2E-X4B3D12-M1?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron E2E-X4B3D12-M1 Inductive Proximity Sensor is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron E2E-X4B3D12-M1 have?
The Omron E2E-X4B3D12-M1 Inductive Proximity Sensor has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron E2E-X4B3D12-M1 in Europe?
The Omron E2E-X4B3D12-M1 Inductive Proximity Sensor is available through Omron’s authorised European distributors.