Omron E2E-S05S12-WC-B2 2M Stainless Inductive Sensor: Technical Guide and Application Manual
Industrial automation decisions are not easily reversed. Choosing the Omron E2E-S05S12-WC-B2 2M Stainless Inductive Sensor for food production applicationsat 12-24V DC is the kind of decision that stays looking smart years later.
In a well-designed automation system, all components of the sensing layer must work in harmony. Omron’s Omron Sensor family is engineered to feed signals to relays and controllers from the same manufacturer.
What Is the Omron E2E-S05S12-WC-B2 2M Stainless Inductive Sensor?
The Omron E2E-S05S12-WC-B2 2M is a Stainless Inductive Sensor rated at 12-24V DC, with 2 m cable length, designed to reliably handle food production applications. Key engineering features include stainless body, food grade, cable 2 m, ip67.
What separates this sensor from generic alternatives is in the details: stainless body, food grade, cable 2 m, ip67. Operating at 12-24V DC, with 2 m cable, it integrates straightforwardly into standard industrial automation systems.
Technical Specifications
The table below summarises the main technical parameters of the Omron E2E-S05S12-WC-B2 2M. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Stainless Inductive Sensor |
| Operating Voltage | 12-24V DC |
| Cable Length | 2 m |
| Output Type | NPN/PNP |
| Output Current | 200 mA |
| Key Features | Stainless body, food grade, cable 2 m, IP67 |
| Mounting | Screw mount |
| Lifetime | Semiconductor |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting bracket |
Where Is It Used?
The Omron E2E-S05S12-WC-B2 2M Stainless Inductive Sensor is commonly specified for the following applications:
- Food production
- Pharmaceutical industry
- Washdown environments
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E2E-S05S12-WC-B2 2M is designed with exactly those conditions in mind.
Installation Notes
Commissioning the Omron E2E-S05S12-WC-B2 2M Stainless Inductive Sensor is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Choose the Omron {c}?
The case for choosing the Omron E2E-S05S12-WC-B2 2M Stainless Inductive Sensor is not built on marketing alone. It rests on measurable factors: tested sensing distance, IP67 protection rating certification, and a global support network.
Frequently Asked Questions
What applications is the Omron E2E-S05S12-WC-B2 2M designed for?
The Omron E2E-S05S12-WC-B2 2M Stainless Inductive Sensor is designed primarily for food production, pharmaceutical industry, washdown environments.
What voltage does the Omron E2E-S05S12-WC-B2 2M operate at?
The Omron E2E-S05S12-WC-B2 2M operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron E2E-S05S12-WC-B2 2M?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron E2E-S05S12-WC-B2 2M Stainless Inductive Sensor is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron E2E-S05S12-WC-B2 2M have?
The Omron E2E-S05S12-WC-B2 2M Stainless Inductive Sensor has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron E2E-S05S12-WC-B2 2M in Europe?
The Omron E2E-S05S12-WC-B2 2M Stainless Inductive Sensor is available through Omron’s authorised European distributors.