Omron E2E-C03SR8-WC-B1 2M Industrial Inductive Sensor: Technical Guide and Application Manual
Ask an automation engineer which sensors they trust, and Omron comes up first. The E2E-C03SR8-WC-B1 2M Industrial Inductive Sensorwith supply voltage 12-24V DC, designed for quick connector mounting applications, built to run trouble-free for years.
Omron’s strength lies in offering complete automation subsystems rather than isolated components. The Omron Sensor lineup complements this product by providing the detection layer.
Omron E2E-C03SR8-WC-B1 2M — Product Profile
The Omron E2E-C03SR8-WC-B1 2M is a Industrial Inductive Sensor rated at 12-24V DC, with 2 m cable length, designed to reliably handle quick connector mounting applications. Key engineering features include m12 body, connector output, cable 2 m, ip67.
In the field, m12 body, connector output, cable 2 m, ip67 stands out immediately. 12-24V DC supply voltage and 2 m cable length aligns with industrial automation standards.
Technical Data Summary
The table below summarises the main technical parameters of the Omron E2E-C03SR8-WC-B1 2M. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Inductive Sensor |
| Operating Voltage | 12-24V DC |
| Cable Length | 2 m |
| Output Type | NPN/PNP |
| Output Current | 200 mA |
| Key Features | M12 body, connector output, cable 2 m, IP67 |
| Mounting | Screw mount |
| Lifetime | Semiconductor |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | M12 connector, mounting bracket |
Where This Product Fits
The Omron E2E-C03SR8-WC-B1 2M Industrial Inductive Sensor is commonly specified for the following applications:
- Quick connector mounting
- Industrial automation
- Metal detection
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E2E-C03SR8-WC-B1 2M is designed with exactly those conditions in mind.
Practical Installation Tips
Commissioning the Omron E2E-C03SR8-WC-B1 2M Industrial Inductive Sensor is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Performance You Can Rely On
From a total cost of ownership perspective, the Omron E2E-C03SR8-WC-B1 2M Industrial Inductive Sensor makes financial sense even when its purchase price is higher than alternatives. Reduced unplanned downtime and fewer replacement cycles add up to a clear advantage.
Frequently Asked Questions
What applications is the Omron E2E-C03SR8-WC-B1 2M designed for?
The Omron E2E-C03SR8-WC-B1 2M Industrial Inductive Sensor is designed primarily for quick connector mounting, industrial automation, metal detection.
What voltage does the Omron E2E-C03SR8-WC-B1 2M operate at?
The Omron E2E-C03SR8-WC-B1 2M operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron E2E-C03SR8-WC-B1 2M?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron E2E-C03SR8-WC-B1 2M Industrial Inductive Sensor is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron E2E-C03SR8-WC-B1 2M have?
The Omron E2E-C03SR8-WC-B1 2M Industrial Inductive Sensor has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron E2E-C03SR8-WC-B1 2M in Europe?
The Omron E2E-C03SR8-WC-B1 2M Industrial Inductive Sensor is available through Omron’s authorised European distributors.