Omron E2B-S08LN04-WP-C1 2M Industrial Automation Component: Technical Guide and Application Manual
Industrial automation decisions are not easily reversed. Choosing the Omron E2B-S08LN04-WP-C1 2M Industrial Automation Component for industrial automation applicationsat 12-24V DC is the kind of decision that stays looking smart years later.
For projects where sensing and control decisions must be made together, Omron’s Omron Sensor products are a natural companion to this unit. Both families are built to the same quality standards.
What Is the Omron E2B-S08LN04-WP-C1 2M Industrial Automation Component?
The Omron E2B-S08LN04-WP-C1 2M is a Industrial Automation Component rated at 12-24V DC, with 2 m cable length, designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance, cable 2 m.
What separates this sensor from generic alternatives is in the details: omron quality assurance, cable 2 m. Operating at 12-24V DC, with 2 m cable, it integrates straightforwardly into standard industrial automation systems.
Technical Specifications
The table below summarises the main technical parameters of the Omron E2B-S08LN04-WP-C1 2M. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Cable Length | 2 m |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance, cable 2 m |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Where Is It Used?
The Omron E2B-S08LN04-WP-C1 2M Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E2B-S08LN04-WP-C1 2M is designed with exactly those conditions in mind.
Installation Notes
One practical aspect of working with sensors like the Omron E2B-S08LN04-WP-C1 2M Industrial Automation Component is mounting consistency. If you have installed another sensor from the same family, the process is identical — same bracket, same cable connection, same adjustment method.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Choose the Omron {c}?
The case for choosing the Omron E2B-S08LN04-WP-C1 2M Industrial Automation Component is not built on marketing alone. It rests on measurable factors: tested sensing distance, IP67 protection rating certification, and a global support network.
Frequently Asked Questions
What is the difference between the Omron E2B-S08LN04-WP-C1 2M and a mechanical limit switch?
The Omron E2B-S08LN04-WP-C1 2M Industrial Automation Component performs contactless detection, meaning it requires no physical contact with the target. This means longer life and higher switching frequency.
How does temperature affect the Omron E2B-S08LN04-WP-C1 2M?
The Omron E2B-S08LN04-WP-C1 2M Industrial Automation Component delivers reliable performance across its specified operating temperature range. At extreme temperatures, sensing distance may shorten.
Can multiple Omron E2B-S08LN04-WP-C1 2M sensors be mounted side by side?
Yes, but leave sufficient spacing between sensors to avoid mutual interference (crosstalk). The minimum spacing is stated in the datasheet.
Does the Omron E2B-S08LN04-WP-C1 2M have a test function?
The Omron E2B-S08LN04-WP-C1 2M Industrial Automation Component is equipped with an LED indicator, allowing you to visually monitor the sensor’s operating status.
What is the warranty period for the Omron E2B-S08LN04-WP-C1 2M?
Omron provides a standard 12-month manufacturer warranty on products purchased through authorised distributors.