Omron E2B-S08KS02-MC-B2 Industrial Automation Component: Technical Guide and Application Manual
A sensor failure on a production line can mean hours of downtime. The Omron E2B-S08KS02-MC-B2 Industrial Automation Component — rated at 12-24V DC — is designed to prevent such unplanned stops in critical applications like industrial automation.
Omron’s sensor portfolio is not limited to photoelectric and inductive technologies. The company’s Omron Sensor range also covers capacitive, ultrasonic and laser sensors — often integrated into the same panel alongside units like this one.
Omron E2B-S08KS02-MC-B2 Overview
The Omron E2B-S08KS02-MC-B2 is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
From a technical standpoint, the Omron E2B-S08KS02-MC-B2 offers omron quality assurance. Supply voltage 12-24V DC delivers reliable field performance.
Key Technical Parameters
The table below summarises the main technical parameters of the Omron E2B-S08KS02-MC-B2. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Typical Application Areas
The Omron E2B-S08KS02-MC-B2 Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E2B-S08KS02-MC-B2 is designed with exactly those conditions in mind.
Mounting and Commissioning
A few installation details make a tangible difference with the Omron E2B-S08KS02-MC-B2 Industrial Automation Component. Mount the sensor at a location free from vibration. Keep the cable route away from sharp edges. Adjust the target distance to operate at 80% of the nominal sensing range.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
The Case for Choosing Omron
Lower-priced alternatives exist, and some perform adequately in light-duty applications. But in continuous-operation environments, the Omron E2B-S08KS02-MC-B2 Industrial Automation Component consistently outlasts them — because every detail has been optimised for industrial use.
Frequently Asked Questions
How do I install the Omron E2B-S08KS02-MC-B2?
Mount the Omron E2B-S08KS02-MC-B2 Industrial Automation Component using a mounting bracket to a stable surface, make cable connections, and adjust the target distance.
What is the service life of the Omron E2B-S08KS02-MC-B2?
As the Omron E2B-S08KS02-MC-B2 Industrial Automation Component uses semiconductor technology with no moving mechanical parts, it has a very long service life.
Is the Omron E2B-S08KS02-MC-B2 sensitive to inductive loads?
The Omron E2B-S08KS02-MC-B2 Industrial Automation Component includes short-circuit and overcurrent protection in its output circuit.
Is the Omron E2B-S08KS02-MC-B2 RoHS compliant?
Omron products conform to RoHS Directive requirements. Specific compliance documentation can be requested from authorised distributors.
What periodic maintenance does the Omron E2B-S08KS02-MC-B2 require?
Keep the sensor lens clean, check cable connections, and ensure the mounting screw is tight.