Omron E2B-S08KN04-WP-C1 2M Industrial Automation Component: Technical Guide and Application Manual
Maintenance teams know the difference between sensors that merely survive and ones that genuinely perform over the long haul. The Omron E2B-S08KN04-WP-C1 2M Industrial Automation Component — 12-24V DC operating voltage — falls firmly in the second category.
For projects where sensing and control decisions must be made together, Omron’s Omron Sensor products are a natural companion to this unit. Both families are built to the same quality standards.
Omron E2B-S08KN04-WP-C1 2M — Product Profile
The Omron E2B-S08KN04-WP-C1 2M is a Industrial Automation Component rated at 12-24V DC, with 2 m cable length, designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance, cable 2 m.
In the field, omron quality assurance, cable 2 m stands out immediately. 12-24V DC supply voltage and 2 m cable length aligns with industrial automation standards.
Technical Data Summary
The table below summarises the main technical parameters of the Omron E2B-S08KN04-WP-C1 2M. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Cable Length | 2 m |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance, cable 2 m |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Where This Product Fits
The Omron E2B-S08KN04-WP-C1 2M Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E2B-S08KN04-WP-C1 2M is designed with exactly those conditions in mind.
Practical Installation Tips
When mounting the Omron E2B-S08KN04-WP-C1 2M Industrial Automation Component in a system, pay attention to three things: the mounting location must be vibration-free; cable tension must not be excessive; target distance must stay within the nominal range.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Performance You Can Rely On
From a total cost of ownership perspective, the Omron E2B-S08KN04-WP-C1 2M Industrial Automation Component makes financial sense even when its purchase price is higher than alternatives. Reduced unplanned downtime and fewer replacement cycles add up to a clear advantage.
Frequently Asked Questions
How do I install the Omron E2B-S08KN04-WP-C1 2M?
Mount the Omron E2B-S08KN04-WP-C1 2M Industrial Automation Component using a mounting bracket to a stable surface, make cable connections, and adjust the target distance.
What is the service life of the Omron E2B-S08KN04-WP-C1 2M?
As the Omron E2B-S08KN04-WP-C1 2M Industrial Automation Component uses semiconductor technology with no moving mechanical parts, it has a very long service life.
Is the Omron E2B-S08KN04-WP-C1 2M sensitive to inductive loads?
The Omron E2B-S08KN04-WP-C1 2M Industrial Automation Component includes short-circuit and overcurrent protection in its output circuit.
Is the Omron E2B-S08KN04-WP-C1 2M RoHS compliant?
Omron products conform to RoHS Directive requirements. Specific compliance documentation can be requested from authorised distributors.
What periodic maintenance does the Omron E2B-S08KN04-WP-C1 2M require?
Keep the sensor lens clean, check cable connections, and ensure the mounting screw is tight.