Omron E2B-M30KS10-WP-C1 2M Inductive Proximity Sensor

The Omron E2B-M30KS10-WP-C1 2M Inductive Proximity Sensor is a cylindrical M30 sensor developed for detecting metallic targets without mechanical contact. Its flush mounting design allows the sensor face to be installed close to surrounding metal structures, which is useful in machine frames, conveyor brackets, and compact automation stations. The 10 mm sensing distance provides a practical detection range for metal parts, tooling positions, and moving machine elements.

The Omron E2B-M30KS10-WP-C1 2M Inductive Proximity Sensor uses an NPN normally open output, making it suitable for control systems designed around sinking input architecture. With a 2 m PVC cable, the sensor can be wired directly into terminal blocks, junction boxes, PLC input modules, or distributed field I/O units.

Omron E2B-M30KS10-WP-C1 2M Technical Description

This model belongs to the Omron E2B cylindrical proximity sensor family. It has a nickel-plated brass housing, M30 threaded body, flush mounting structure, and IP67 protection. The short body format supports installation in areas where panel depth or machine clearance is limited.

The sensor is intended for metallic target detection. It does not require direct contact with the object, which reduces mechanical wear and helps maintain repeatable switching in automated equipment.

Working Principle

Inductive proximity sensors operate by generating a high-frequency electromagnetic field at the sensing face. When a conductive metal object enters this field, eddy currents are induced in the target. These currents absorb energy from the oscillator circuit inside the sensor.

The internal electronics monitor the change in oscillation level. When the target reaches the switching threshold, the sensor changes the output state. In this model, the output is NPN normally open, so it is typically used with compatible controller input circuits that expect a sinking signal.

Usage Areas

• Metal part presence detection
• Conveyor position monitoring
• Machine cycle confirmation
• Workpiece detection in assembly cells
• Fixture and clamp position checking
• Transfer unit position feedback
• Packaging machine component detection
• Industrial automation panel applications

Omron E2B-M30KS10-WP-C1 2M Industrial Applications

Machine Tool Systems

The sensor can be used to confirm the position of metal slides, tool holders, or mechanical stops in machining equipment.

Automated Assembly Lines

It supports metal bracket detection, carrier plate monitoring, and part arrival confirmation in assembly sequences.

Material Handling

In conveyor systems, the sensor may detect metal stops, transfer arms, guide rails, or moving carriers.

Packaging Equipment

The sensor can monitor metal machine elements in indexing mechanisms, sealing stations, or product handling units.

Advantages

• Non-contact metallic object detection
• Flush mounting capability
• Compact short-body M30 design
• NPN normally open output for sinking input systems
• Nickel-plated brass housing
• 2 m PVC cable for direct wiring
• IP67 protection for industrial environments
• Suitable for repetitive machine-cycle feedback

Sector-Specific Usage Examples

• Detecting steel carriers in automotive subassembly stations
• Monitoring metal guide positions in carton handling machines
• Checking fixture presence in welding preparation areas
• Confirming actuator end positions in transfer equipment
• Detecting tooling plates in compact production cells

Omron E2B-M30KS10-WP-C1 2M Selection Considerations

When selecting this sensor, engineers should verify the sensing distance, target material, available mounting space, controller input type, cable routing, and environmental conditions. Since this model has an NPN output, it should be matched with compatible PLC input architecture. The 10 mm sensing distance should also be evaluated against the actual target size, shape, and installation tolerance.

For related product families, see Omron sensor product ranges.

Omron E2B-M30KS10-WP-C1 2M Frequently Asked Questions

What does this sensor detect?

It detects metallic objects using inductive sensing technology.

What is the sensing distance?

The nominal sensing distance is 10 mm.

What output type does it use?

It uses an NPN output.

Is the output normally open?

Yes, this model has a normally open output configuration.

Can it be mounted flush?

Yes, the sensor is designed for flush mounting.

What cable does it have?

It has a 2 m PVC cable.

What is the housing material?

The housing is nickel-plated brass.

Where is it commonly used?

It is used in machine automation, conveyors, assembly systems, and metal part detection applications.