Omron E2B-M12KS02-M1-B1 Industrial Automation Component: Technical Guide and Application Manual
Maintenance teams know the difference between sensors that merely survive and ones that genuinely perform over the long haul. The Omron E2B-M12KS02-M1-B1 Industrial Automation Component — 12-24V DC operating voltage — falls firmly in the second category.
Omron Omron Sensor products are commonly found on the same mounting panel as this unit. The shared design philosophy means a system built with multiple Omron product families has consistency.
Omron E2B-M12KS02-M1-B1 — Product Profile
The Omron E2B-M12KS02-M1-B1 is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
In the field, omron quality assurance stands out immediately. 12-24V DC supply voltage aligns with industrial automation standards.
Technical Data Summary
The table below summarises the main technical parameters of the Omron E2B-M12KS02-M1-B1. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN output |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Where This Product Fits
The Omron E2B-M12KS02-M1-B1 Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E2B-M12KS02-M1-B1 is designed with exactly those conditions in mind.
Practical Installation Tips
Installation is straightforward: determine the mounting location, secure the sensor with screws or bracket, connect the cable to the correct terminals, and adjust the target distance. The Omron E2B-M12KS02-M1-B1 Industrial Automation Component requires no specialised tools.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Performance You Can Rely On
From a total cost of ownership perspective, the Omron E2B-M12KS02-M1-B1 Industrial Automation Component makes financial sense even when its purchase price is higher than alternatives. Reduced unplanned downtime and fewer replacement cycles add up to a clear advantage.
Frequently Asked Questions
What applications is the Omron E2B-M12KS02-M1-B1 designed for?
The Omron E2B-M12KS02-M1-B1 Industrial Automation Component is designed primarily for industrial automation, control systems, machine building.
What voltage does the Omron E2B-M12KS02-M1-B1 operate at?
The Omron E2B-M12KS02-M1-B1 operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron E2B-M12KS02-M1-B1?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron E2B-M12KS02-M1-B1 Industrial Automation Component is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron E2B-M12KS02-M1-B1 have?
The Omron E2B-M12KS02-M1-B1 Industrial Automation Component has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron E2B-M12KS02-M1-B1 in Europe?
The Omron E2B-M12KS02-M1-B1 Industrial Automation Component is available through Omron’s authorised European distributors.