Omron E2A-S12KS04-M1-B2 Industrial Automation Component: Technical Guide and Application Manual
Selecting a sensor requires more than just checking the sensing distance. The Omron E2A-S12KS04-M1-B2 is a Industrial Automation Component thatoperates at 12-24V DC and stands out in industrial automation applications with field-tested reliability.
Sensor selection rarely happens in isolation. Alongside this sensor, many integrators also evaluate other Omron Omron Sensor technologies — models using different detection principles.
What Is the Omron E2A-S12KS04-M1-B2 Industrial Automation Component?
The Omron E2A-S12KS04-M1-B2 is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
What separates this sensor from generic alternatives is in the details: omron quality assurance. Operating at 12-24V DC, it integrates straightforwardly into standard industrial automation systems.
Technical Specifications
The table below summarises the main technical parameters of the Omron E2A-S12KS04-M1-B2. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN output |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Where Is It Used?
The Omron E2A-S12KS04-M1-B2 Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E2A-S12KS04-M1-B2 is designed with exactly those conditions in mind.
Installation Notes
When mounting the Omron E2A-S12KS04-M1-B2 Industrial Automation Component in a system, pay attention to three things: the mounting location must be vibration-free; cable tension must not be excessive; target distance must stay within the nominal range.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Choose the Omron {c}?
The case for choosing the Omron E2A-S12KS04-M1-B2 Industrial Automation Component is not built on marketing alone. It rests on measurable factors: tested sensing distance, IP67 protection rating certification, and a global support network.
Frequently Asked Questions
How do I install the Omron E2A-S12KS04-M1-B2?
Mount the Omron E2A-S12KS04-M1-B2 Industrial Automation Component using a mounting bracket to a stable surface, make cable connections, and adjust the target distance.
What is the service life of the Omron E2A-S12KS04-M1-B2?
As the Omron E2A-S12KS04-M1-B2 Industrial Automation Component uses semiconductor technology with no moving mechanical parts, it has a very long service life.
Is the Omron E2A-S12KS04-M1-B2 sensitive to inductive loads?
The Omron E2A-S12KS04-M1-B2 Industrial Automation Component includes short-circuit and overcurrent protection in its output circuit.
Is the Omron E2A-S12KS04-M1-B2 RoHS compliant?
Omron products conform to RoHS Directive requirements. Specific compliance documentation can be requested from authorised distributors.
What periodic maintenance does the Omron E2A-S12KS04-M1-B2 require?
Keep the sensor lens clean, check cable connections, and ensure the mounting screw is tight.