Omron E2A-S12KS04-M1-B1 Industrial Automation Component: Technical Guide and Application Manual
The Omron E2A-S12KS04-M1-B1 is a Industrial Automation Component developed for engineers who understand that the cost of an unplanned stop far exceeds the cost of a quality sensor. Operating voltage 12-24V DC, it addresses real challenges in industrial automation.
For projects where sensing and control decisions must be made together, Omron’s Omron Sensor products are a natural companion to this unit. Both families are built to the same quality standards.
Understanding the Omron E2A-S12KS04-M1-B1 Industrial Automation Component
The Omron E2A-S12KS04-M1-B1 is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
Technically, the Omron E2A-S12KS04-M1-B1 delivers omron quality assurance. 12-24V DC voltage rating simplifies system integration.
Core Specifications
The table below summarises the main technical parameters of the Omron E2A-S12KS04-M1-B1. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN output |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Application Scenarios
The Omron E2A-S12KS04-M1-B1 Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron E2A-S12KS04-M1-B1 is designed with exactly those conditions in mind.
Getting It Right at Installation
Commissioning the Omron E2A-S12KS04-M1-B1 Industrial Automation Component is easy. Attach to the mounting bracket, make cable connections, and verify polarity. During the first test, move the target in and out of the sensing area and observe that the LED indicator responds stably.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Engineers Choose Omron
Specifying the Omron E2A-S12KS04-M1-B1 Industrial Automation Component also means specifying into an ecosystem. Omron’s portfolio covers sensors, relays, PLCs, power supplies, and more — all engineered to work together.
Frequently Asked Questions
What applications is the Omron E2A-S12KS04-M1-B1 designed for?
The Omron E2A-S12KS04-M1-B1 Industrial Automation Component is designed primarily for industrial automation, control systems, machine building.
What voltage does the Omron E2A-S12KS04-M1-B1 operate at?
The Omron E2A-S12KS04-M1-B1 operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron E2A-S12KS04-M1-B1?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron E2A-S12KS04-M1-B1 Industrial Automation Component is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron E2A-S12KS04-M1-B1 have?
The Omron E2A-S12KS04-M1-B1 Industrial Automation Component has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron E2A-S12KS04-M1-B1 in Europe?
The Omron E2A-S12KS04-M1-B1 Industrial Automation Component is available through Omron’s authorised European distributors.