Omron AUTOMATION PROJECT-SM-02 Industrial Automation Component: Technical Guide and Application Manual
When a machine must run continuously, sensor selection is not about saving a few pounds on the BOM — it is about selecting products that will not become a production problem. The Omron AUTOMATION PROJECT-SM-02 Industrial Automation Component (12-24V DC) is designed precisely for that reality.
Many engineers working with this product also specify other Omron Omron Sensor models on the same project. The shared ecosystem means cable standards and mounting accessories are compatible.
About the Omron AUTOMATION PROJECT-SM-02 Industrial Automation Component
The Omron AUTOMATION PROJECT-SM-02 is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
The engineering case for the Omron AUTOMATION PROJECT-SM-02 Industrial Automation Component rests on clear advantages: omron quality assurance. Voltage rating 12-24V DC, covers most industrial installation scenarios.
Specifications at a Glance
The table below summarises the main technical parameters of the Omron AUTOMATION PROJECT-SM-02. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Industry Use Cases
The Omron AUTOMATION PROJECT-SM-02 Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron AUTOMATION PROJECT-SM-02 is designed with exactly those conditions in mind.
Installation Checklist
A few installation details make a tangible difference with the Omron AUTOMATION PROJECT-SM-02 Industrial Automation Component. Mount the sensor at a location free from vibration. Keep the cable route away from sharp edges. Adjust the target distance to operate at 80% of the nominal sensing range.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Omron AUTOMATION PROJECT-SM-02: Long-Term Value
Omron’s reputation in automation did not come from clever advertising. It came from decades of sensors performing reliably in factories worldwide. The AUTOMATION PROJECT-SM-02 Industrial Automation Component is a current embodiment of that engineering culture.
Frequently Asked Questions
How do I install the Omron AUTOMATION PROJECT-SM-02?
Mount the Omron AUTOMATION PROJECT-SM-02 Industrial Automation Component using a mounting bracket to a stable surface, make cable connections, and adjust the target distance.
What is the service life of the Omron AUTOMATION PROJECT-SM-02?
As the Omron AUTOMATION PROJECT-SM-02 Industrial Automation Component uses semiconductor technology with no moving mechanical parts, it has a very long service life.
Is the Omron AUTOMATION PROJECT-SM-02 sensitive to inductive loads?
The Omron AUTOMATION PROJECT-SM-02 Industrial Automation Component includes short-circuit and overcurrent protection in its output circuit.
Is the Omron AUTOMATION PROJECT-SM-02 RoHS compliant?
Omron products conform to RoHS Directive requirements. Specific compliance documentation can be requested from authorised distributors.
What periodic maintenance does the Omron AUTOMATION PROJECT-SM-02 require?
Keep the sensor lens clean, check cable connections, and ensure the mounting screw is tight.