Omron A22NE-M-P202-N-B Industrial Automation Component: Technical Guide and Application Manual
Some sensors look good on a catalogue page but disappoint in the field. The Omron A22NE-M-P202-N-B Industrial Automation Component is not one of them — 12-24V DC operating voltage, IP67 protection and proven durability in industrial automation make it ready for real-world conditions.
For projects where sensing and control decisions must be made together, Omron’s Omron Sensor products are a natural companion to this unit. Both families are built to the same quality standards.
About the Omron A22NE-M-P202-N-B Industrial Automation Component
The Omron A22NE-M-P202-N-B is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
The engineering case for the Omron A22NE-M-P202-N-B Industrial Automation Component rests on clear advantages: omron quality assurance. Voltage rating 12-24V DC, covers most industrial installation scenarios.
Specifications at a Glance
The table below summarises the main technical parameters of the Omron A22NE-M-P202-N-B. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Industry Use Cases
The Omron A22NE-M-P202-N-B Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron A22NE-M-P202-N-B is designed with exactly those conditions in mind.
Installation Checklist
The Omron A22NE-M-P202-N-B Industrial Automation Component follows standard industrial mounting practice. Before mounting, ensure the target surface is clean and free from metal debris. After mounting, test the signal output and verify that the LED indicator responds correctly.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Omron A22NE-M-P202-N-B: Long-Term Value
Omron’s reputation in automation did not come from clever advertising. It came from decades of sensors performing reliably in factories worldwide. The A22NE-M-P202-N-B Industrial Automation Component is a current embodiment of that engineering culture.
Frequently Asked Questions
What is the difference between the Omron A22NE-M-P202-N-B and a mechanical limit switch?
The Omron A22NE-M-P202-N-B Industrial Automation Component performs contactless detection, meaning it requires no physical contact with the target. This means longer life and higher switching frequency.
How does temperature affect the Omron A22NE-M-P202-N-B?
The Omron A22NE-M-P202-N-B Industrial Automation Component delivers reliable performance across its specified operating temperature range. At extreme temperatures, sensing distance may shorten.
Can multiple Omron A22NE-M-P202-N-B sensors be mounted side by side?
Yes, but leave sufficient spacing between sensors to avoid mutual interference (crosstalk). The minimum spacing is stated in the datasheet.
Does the Omron A22NE-M-P202-N-B have a test function?
The Omron A22NE-M-P202-N-B Industrial Automation Component is equipped with an LED indicator, allowing you to visually monitor the sensor’s operating status.
What is the warranty period for the Omron A22NE-M-P202-N-B?
Omron provides a standard 12-month manufacturer warranty on products purchased through authorised distributors.