Omron A165E-02 Industrial Automation Component: Technical Guide and Application Manual
Selecting a sensor requires more than just checking the sensing distance. The Omron A165E-02 is a Industrial Automation Component thatoperates at 12-24V DC and stands out in industrial automation applications with field-tested reliability.
Many engineers working with this product also specify other Omron Omron Sensor models on the same project. The shared ecosystem means cable standards and mounting accessories are compatible.
What Is the Omron A165E-02 Industrial Automation Component?
The Omron A165E-02 is a Industrial Automation Component rated at 12-24V DC designed to reliably handle industrial automation applications. Key engineering features include omron quality assurance.
What separates this sensor from generic alternatives is in the details: omron quality assurance. Operating at 12-24V DC, it integrates straightforwardly into standard industrial automation systems.
Technical Specifications
The table below summarises the main technical parameters of the Omron A165E-02. For complete specifications, refer to the official Omron product datasheet.
| Parameter | Value |
|---|---|
| Product Type | Industrial Automation Component |
| Operating Voltage | 12-24V DC |
| Output Type | NPN/PNP |
| Key Features | Omron quality assurance |
| Operating Temperature | -25°C to +70°C |
| Compatible Accessory | Mounting accessories |
Where Is It Used?
The Omron A165E-02 Industrial Automation Component is commonly specified for the following applications:
- Industrial automation
- Control systems
- Machine building
Across these use cases, the consistent requirement is reliable detection — often in environments where an unplanned fault would create significant disruption. The Omron A165E-02 is designed with exactly those conditions in mind.
Installation Notes
Installation is straightforward: determine the mounting location, secure the sensor with screws or bracket, connect the cable to the correct terminals, and adjust the target distance. The Omron A165E-02 Industrial Automation Component requires no specialised tools.
For ongoing maintenance, keep the sensor lens clean, check cable connections, and periodically test that the LED indicator functions correctly. Early intervention avoids the much larger cost of an unplanned production stop.
Why Choose the Omron {c}?
The case for choosing the Omron A165E-02 Industrial Automation Component is not built on marketing alone. It rests on measurable factors: tested sensing distance, IP67 protection rating certification, and a global support network.
Frequently Asked Questions
What applications is the Omron A165E-02 designed for?
The Omron A165E-02 Industrial Automation Component is designed primarily for industrial automation, control systems, machine building.
What voltage does the Omron A165E-02 operate at?
The Omron A165E-02 operates at 12-24V DC supply voltage.
What is the sensing distance of the Omron A165E-02?
Sensing distance depends on target material and environmental conditions. The nominal sensing distance for the Omron A165E-02 Industrial Automation Component is stated in the datasheet. In actual applications, 80% safe operating margin is recommended.
What protection rating does the Omron A165E-02 have?
The Omron A165E-02 Industrial Automation Component has IP67 protection rating, meaning it is protected against dust and temporary water immersion.
Where can I source the Omron A165E-02 in Europe?
The Omron A165E-02 Industrial Automation Component is available through Omron’s authorised European distributors.