Elesa+Ganter 11057 HCV.76-E-STL-NC-M10 Electrical Oil Level Indicator

Product Overview

The Elesa+Ganter 11057 electrical oil level indicator, identified as HCV.76-E-STL-NC-M10, is engineered for hydraulic systems that require reliable oil level visibility and automatic minimum level detection. This column level indicator gives operators a clear visual reading while also sending an electrical signal when the oil reaches a critical low point.

Technical Construction

The body is made from transparent PA-T technopolymer, selected for impact resistance and compatibility with many industrial oils and hydrocarbons. The indicator is supplied with zinc-plated steel screws, nuts, and washers. NBR synthetic rubber sealing elements support leak-resistant mounting against the reservoir surface.

The 76 mm fixing distance and M10 screw thread make the product suitable for compact tanks and standard hydraulic reservoir layouts. Its white contrast screen improves readability, even in busy machine environments where fast visual checks matter.

Normally Closed Contact Function

The NC version means the electrical contact is normally closed. When the float reaches the minimum level threshold, the contact opens. This behaviour is often preferred in circuits where signal interruption must indicate a low-level condition or fault status.

Temperature Probe Advantage

In addition to oil level detection, this model includes a temperature electrical probe. The probe uses resistance variation to support analogue temperature monitoring. This allows maintenance teams to follow both oil level and operating temperature from one compact component.

Elesa+Ganter 11057 HCV.76-E-STL-NC-M10 Indicator For more technical component information, explore Elesa+Ganter.

Elesa+Ganter 11057 HCV.76-E-STL-NC-M10 Indicator FAQ

What is the main difference between NO and NC versions?

In the NC version, the contact is normally closed and opens when the minimum oil level is reached. In the NO version, the contact is normally open and closes at the minimum level.

What product type is Elesa+Ganter 11057?

It is an electrical oil level indicator with a minimum level sensor and temperature probe for hydraulic reservoir monitoring.

Is HCV.76-E-STL-NC-M10 only for visual control?

No. It provides both visual oil level reading and electrical signalling, making it useful for manual checks and automated monitoring systems.

What should be considered during installation?

The sealing surface should be properly prepared, the tightening torque should be respected, and the unit should not be installed close to strong magnetic fields.