Telemecanique XT530B1FBL2 Capacitive Proximity Sensor

The Telemecanique XT530B1FBL2 capacitive proximity sensor is designed for industrial applications where reliable detection of conductive and non-conductive materials is required. As part of the Telemecanique XT capacitive sensor range, this model is built in a cylindrical M30 format and uses a nickel-plated brass enclosure, giving it a strong mechanical profile for demanding machine environments.

This sensor is especially useful when the target material is not always metallic. Capacitive sensing technology allows the device to detect materials such as plastic, glass, liquid, powder, granules, cardboard, and metal, depending on the installation conditions and sensitivity setting. That makes the Telemecanique XT530B1FBL2 sensor a practical option for packaging lines, filling systems, material handling equipment, and process automation.

Telemecanique XT530B1FBL2 Key Technical Characteristics

The XT530B1FBL2 is a capacitive proximity sensor with a cylindrical M30 body and a nominal sensing distance of 10 mm. It uses a 2-wire wiring technique and has a normally closed output function. The rated supply voltage is 24 to 240 V AC at 50 to 60 Hz, which makes it suitable for systems where AC control voltage is already available.

The sensor includes a 2 m cable connection, helping reduce the need for additional connector accessories in many installations. Its flush-mountable design allows it to be installed level with the surrounding mounting surface, provided that correct mounting distances and setup rules are followed.

Industrial Design and Protection

The sensor housing is made from nickel-plated brass, while the detection face is positioned frontally. This design supports stable mounting in industrial panels, brackets, and machine frames. The sensor carries IP65 and IP67 protection ratings according to IEC 60529, helping protect it against dust and water exposure in normal industrial environments.

For setup and monitoring, the XT530B1FBL2 includes LED indication for output state and power status. Sensitivity can be adjusted using a potentiometer, allowing the installer to adapt detection behavior to the target material and application distance. This is important for capacitive sensors because material density, target size, humidity, and mounting conditions can influence detection performance.

How the Telemecanique XT530B1FBL2 Works

Unlike inductive proximity sensors, which are mainly used for metal detection, capacitive sensors detect changes in the electrical field near the sensing face. When an object enters the sensing zone, the sensor recognizes the change and switches its discrete output. In this model, the output function is normally closed, meaning the output logic should be reviewed carefully before integrating it into a control circuit.

Because the XT530B1FBL2 operates with AC supply voltage, it is often considered for applications where legacy relay circuits, AC input modules, or existing machine wiring make a 24 to 240 V AC sensor practical. Correct load selection and wiring are essential for stable operation.

Typical Applications

The Telemecanique XT530B1FBL2 capacitive proximity sensor can be used for level detection through non-metallic container walls, object presence detection on conveyors, detection of packaged goods, and monitoring of bulk material flow. It is also suitable for applications where the target material may vary between metallic and non-metallic surfaces.

For additional product families and related automation components, visit Telemecanique industrial sensor solutions.

Frequently Asked Questions

What type of sensor is the Telemecanique XT530B1FBL2?

It is a capacitive proximity sensor in a cylindrical M30 housing. It is designed to detect insulated and conductive materials, making it more flexible than a sensor intended only for metal detection.

What is the sensing distance of the XT530B1FBL2?

The nominal sensing distance is 10 mm. Actual performance can vary depending on the target material, target size, mounting position, and sensitivity adjustment.

Does the XT530B1FBL2 use AC or DC power?

This model uses 24 to 240 V AC at 50 to 60 Hz. It is therefore suitable for AC control systems where a compatible load and correct wiring are used.

What does 1 NC mean on this sensor?

1 NC means one normally closed output. In a normal state, the output logic is closed, and it changes state when the sensor detects a target according to its operating principle.

Can the Telemecanique XT530B1FBL2 detect plastic or liquid?

Yes. Capacitive proximity sensors can detect many non-metallic materials, including plastic, glass, powders, granules, and liquids. The final result depends on material properties and installation conditions.

Is the Telemecanique XT530B1FBL2suitable for harsh environments?

The sensor has IP65 and IP67 protection ratings, a nickel-plated brass enclosure, and industrial shock and vibration resistance. It should still be installed according to the manufacturer’s guidance for best reliability.