Honeywell 13AT418-T2 Toggle Switch: Sealed AT Series Overview
The Honeywell 13AT418-T2 operator controls accessory is typically listed as a Honeywell AT Series toggle switch with a DPDT contact form and a 3-position On-Off-On switching function. Current distributor information shows a 5 A rating, 250 V AC rating, 30 V DC rating, 15/32-32 bushing size, solder-pin style termination, sealed terminal construction, paddle actuator, and an actuator length of 16.26 mm. Other listings identify it as a discontinued or no-longer-available variant, which makes accurate technical identification more important for service and retrofit projects.
How the Honeywell 13AT418-T2 differs from nearby AT Series variants
In the Honeywell AT family, the differences between part numbers often come down to pole count, switch function, lever style, and lifecycle status. The Honeywell 13AT418-T2 toggle switch stands out for combining a DPDT On-Off-On function with sealed terminal construction and a paddle-style actuator. That profile can be useful in control panels exposed to harsher environments or routine maintenance cycles where contamination resistance matters. It is the kind of part engineers often search for using phrases such as Honeywell 13AT418-T2 panel mount switch, Honeywell sealed toggle switch, or Honeywell DPDT industrial toggle.
Panel design and application context
A maintained On-Off-On switch can support mode changes, directional selections, and branch control choices in industrial assemblies. Because the Honeywell 13AT418-T2 operator controls accessory uses the established AT Series geometry, it fits the broader ecosystem of manual control hardware familiar to panel builders and maintenance teams. The sealed terminal note is especially relevant in installations where moisture, dust, or environmental exposure can degrade standard open-terminal switch performance over time.
Replacement and specification considerations
When teams are working on an installed machine, they usually need more than just the part code. They need the functional pattern, the circuit type, the mounting thread, and the actuator format. For the Honeywell 13AT418-T2, those useful reference points include DPDT, On-Off-On, 5 A capacity, 15/32-32 bushing size, and 16.26 mm actuator length. Those details give maintenance personnel a practical baseline for cross-referencing legacy hardware or checking whether an available replacement preserves the operator experience of the original panel.
FAQ
What kind of switch is the Honeywell 13AT418-T2?
It is generally listed as a Honeywell AT Series DPDT panel-mount toggle switch with a 3-position On-Off-On function.
Is the Honeywell 13AT418-T2 sealed?
Distributor specifications identify sealed terminal construction for this model. That can be useful in applications where environmental protection is a factor.
What are the rated electrical values?
Current listings show 5 A, 250 V AC, and 30 V DC for this variant. Those figures should still be checked against the actual circuit load and duty cycle during design review.
What actuator style is used on this switch?
Available product data describes a paddle actuator with an actuator length of 16.26 mm, which helps distinguish it from other AT Series lever variations.
Where can I read more about the Honeywell product family?
For more information, review the Honeywell section for related industrial control products.