Honeywell GPTJG3YX350BSCHX Pressure Transducer for Demanding Industrial Systems
The Honeywell GPTJG3YX350BSCHX pressure transducer is a high-range industrial sensing device intended for demanding pressure measurement tasks. As a Honeywell GPTJG3YX350BSCHX pressure transducer, this model is listed in the GPT III series and described as a sealed gauge pressure sensor with a 4-20 mA analog output, ±0.5% accuracy, and an operating pressure of 5076.32 psi, which corresponds to 35000 kPa. Some distributor references also identify it as a DIN-oriented general pressure transducer variant.
That specification profile makes the Honeywell GPTJG3YX350BSCHX pressure transducer especially relevant in industrial environments where pressure levels exceed the range of general-purpose transmitters. In these systems, stable signal output, robust mechanical connection, and temperature-tolerant operation are essential. The sensor is not aimed at simple consumer or light-duty monitoring. It is intended for serious instrumentation work where pressure data informs control, safety, and maintenance decisions.
Technical Features of the Honeywell GPTJG3YX350BSCHX Pressure Transducer
The Honeywell GPTJG3YX350BSCHX pressure transducer is listed with a sealed gauge sensing format, 4-20 mA analog current output, and a supply range of 8 V to 32 V. It uses a male G 1/4 threaded port and is described with temperature compensation, which is important when pressure measurements must stay stable across changing thermal conditions. The operating temperature range is listed from -40°C to 125°C, supporting use in challenging industrial environments.
In engineering practice, the 4-20 mA output matters because it remains a preferred standard for process control and industrial automation. It allows the Honeywell GPTJG3YX350BSCHX pressure transducer to integrate with many established monitoring platforms without requiring complex signal conversion. For operators, that means easier commissioning and more straightforward compatibility with common industrial control hardware.
Where the Honeywell GPTJG3YX350BSCHX Pressure Transducer Can Be Used
A Honeywell GPTJG3YX350BSCHX pressure transducer can be considered for hydraulic machinery, industrial fluid systems, process skids, test and measurement rigs, and installations where high sealed-gauge pressure readings must be measured continuously. Because it offers a relatively high pressure range, it may be a more appropriate fit in heavy-duty systems than lower-range pressure transmitters.
It is also useful in design environments where exact sensor behavior matters. Pressure range, signal standard, port geometry, and operating temperature all influence system reliability. Users reviewing alternatives within the same manufacturer ecosystem can explore more via Honeywell references.
Why Searchers Need Exact Honeywell GPTJG3YX350BSCHX Pressure Transducer Data
Search demand for the Honeywell GPTJG3YX350BSCHX pressure transducer usually comes from technical decision-makers who need exact range and output confirmation. In industrial instrumentation, selecting the wrong pressure range can reduce measurement resolution or expose the system to overload risk. Choosing the wrong output type can create control-system incompatibility. Those are not minor issues, which is why exact-code research remains critical.
That is also why informational content for this model should stay grounded in real specifications. Readers are typically comparing fit, not browsing casually. The Honeywell GPTJG3YX350BSCHX pressure transducer is a product people search when they need technical alignment.
FAQ: Honeywell GPTJG3YX350BSCHX Pressure Transducer
What pressure range does the GPTJG3YX350BSCHX support?
Available technical listings show an operating pressure of 5076.32 psi, equivalent to 35000 kPa.
What output signal does the Honeywell pressure transducer provide?
It uses a 4-20 mA analog current output, which is widely used in industrial monitoring and control systems.
Is the GPTJG3YX350BSCHX designed for harsh environments?
It is specified with temperature compensation and an operating temperature range of -40°C to 125°C, which supports use in demanding industrial conditions.
What kind of pressure type does this model measure?
The GPTJG3YX350BSCHX is listed as a sealed gauge pressure transducer, meaning it measures pressure relative to ambient atmospheric conditions.
Why is exact-code research important for this pressure transducer?
Because industrial systems depend on exact pressure range, output type, port connection, and environmental capability. Small specification differences can have major system-level consequences.