Weidmüller 1002380000 BLF 5.08HC/12/90LR SN OR BX Technical Guide
The Weidmüller 1002380000 BLF 5.08HC/12/90LR SN OR BX PCB plug-in connector is a 12-pole female plug developed for industrial electronic assemblies that require a higher conductor count in one pluggable interface. As part of the OMNIMATE Signal BL/SL 5.08 family, it features a 5.08 mm pitch, a 90° conductor outlet, and PUSH IN with actuator technology. This exact version is specified with a maximum clamping range of 3.31 mm² and electrical performance up to 400 V / 24 A under IEC and 300 V / 18.5 A under UL.
Why the 12-Pole Version Is Important in Industrial Design
The Weidmüller BLF 5.08HC/12/90LR SN OR BX connector addresses a common design need in advanced industrial electronics: keeping a larger number of field connections inside one clear, service-friendly plug-in format. Twelve poles create substantial flexibility for grouped signals, control lines, commons, and application-specific wiring arrangements.
That makes this connector especially useful in machine electronics, communication hardware, modular automation products, distributed control systems, and OEM devices where multiple conductors must be connected reliably but also remain accessible for maintenance. In practice, high pole-count pluggable interfaces can significantly improve the operational logic of a product.
Weidmüller 1002380000 Connection Technology Built for Daily Use
The PUSH IN with actuator design supports fast conductor insertion and practical release, which is essential in both manufacturing and service. Industrial connectors are expected to support not only electrical performance but also repeatable human interaction. A connector that is intuitive to wire and easy to inspect can improve assembly consistency across many product units.
The family around this product is also associated with secure and durable contact behavior, high vibration resistance, wide clamping range, self-locking plug-in action, and handling concepts aimed at reducing installation effort. These characteristics are especially important when the connector is part of equipment that may run for years in demanding operational settings.
Why a 12-Pole PCB Connector Can Simplify the Product Architecture
A 12-pole PCB plug-in connector helps designers consolidate a relatively large conductor set into a single structured interface. That can be preferable to using multiple smaller connectors, which may complicate labeling, spread the wiring architecture across the board, and create more opportunities for service errors.
With one 12-position interface, the product can often be documented more clearly and maintained more efficiently. This is particularly helpful in industrial sectors where downtime, replacement time, and field-service quality all have direct operational consequences.
Mechanical and Electrical Relevance
The Weidmüller 1002380000 BLF 5.08HC/12/90LR SN OR BX follows the familiar BLF 5.08HC concept with conductors up to 2.5 mm² and a 90-degree outlet that helps route wires parallel to the enclosure or board edge. This routing behavior can improve cable organization and make nearby components easier to access.
The 5.08 mm pitch remains a practical standard in industrial PCB connectivity because it provides a strong balance between compactness and usability. Combined with the higher pole count, it gives product designers a connector format that is efficient without becoming awkward to handle in the field.
Where This Connector Fits Best
The Weidmüller BLF 5.08HC/12/90LR SN OR BX female plug connector is relevant for controller assemblies, industrial communication devices, building automation electronics, distributed I/O systems, machine interface boards, and OEM products that need a 12-position pluggable field connection.
It is also a strategic option for manufacturers seeking family-based connector standardization. By using related connectors across different pole counts, they can maintain a consistent engineering language while adapting each product to its exact conductor requirements.
Weidmüller 1002380000 FAQ
What is the Weidmüller 1002380000 connector designed for?
It is designed as a 12-pole female PCB plug-in connector for industrial field wiring and removable board-level connections.
Why use a 12-pole connector in industrial electronics?
A 12-pole connector allows many conductors to be grouped in one organized interface, which can simplify product architecture and improve service clarity.
Does this connector support industrial voltage and current requirements?
Yes. It is specified up to 400 V / 24 A under IEC and 300 V / 18.5 A under UL, which makes it relevant for many industrial applications.
What is the role of PUSH IN with actuator?
It helps create a fast and practical wiring process while also supporting easier conductor release during maintenance or replacement work.
Why is the 90-degree outlet useful?
It supports flatter wire routing, which can improve internal cable organization and help in compact housing designs.
Can this connector reduce service complexity?
Yes. By keeping twelve conductors in one removable interface, it can reduce connector fragmentation and make servicing more straightforward.
Weidmüller 1002380000 Is this connector part of the Weidmüller OMNIMATE Signal family?
Yes. It belongs to the BLF 5.08HC series within the OMNIMATE Signal connector portfolio.
Weidmüller 1002380000 For more information, visit more about Weidmüller.