Weidmüller BLF 5.08HC/13/90F SN OR BX PCB Connector
The Weidmüller BLF 5.08HC/13/90F SN OR BX, order number 1002200000, is a practical industrial PCB connector for engineers who need a pluggable, right-angle, multi-pole wiring interface on a control board. In the real world, this is the kind of component that helps bring order to complex wiring layouts. With a 13-pole configuration, it sits in a useful middle ground: more flexible than smaller signal connectors, but still compact enough for dense electronics assemblies.
Search demand around terms like Weidmüller BLF 5.08HC/13/90F PCB connector, 13-pole pluggable terminal block, and 5.08 mm female plug connector exists for a reason. Designers, buyers, and maintenance teams are often looking for components that are easy to integrate, easy to wire, and dependable in industrial environments. This connector addresses those priorities through a proven pitch size, straightforward PUSH IN operation, and a board-friendly 90-degree form factor.
Technical Characteristics That Matter
The Weidmüller 1002200000 is specified as a female plug for PCB use with 5.08 mm pitch, 13 poles, and a 90° outlet direction. It uses PUSH IN with actuator connection technology and supports a maximum clamping range of 3.31 mm². Official ratings show IEC 400 V / 24 A / 0.2–2.5 mm² and UL 300 V / 18.5 A / AWG 26–12. Those numbers are relevant because they tell the engineer that the connector is not limited to very light signal duty only; it is designed for serious industrial board-level interconnection within the boundaries of the product standard.
From a layout perspective, the 5.08 mm pitch is still a preferred format in many industrial applications. It provides practical conductor spacing, good handling, and a familiar ecosystem of mating connector options. That means the Weidmüller BLF 5.08HC/13/90F SN OR BX female plug can fit smoothly into design platforms where the engineering team wants consistency across several PCB assemblies.
Why a 13-Pole Connector Is Useful
A 13-pole connector is not the most common count, which is exactly why it can be so valuable. It helps avoid over-dimensioning the wiring interface when the design does not need 12 and does not justify 14 or more in a mirrored pairing arrangement. In practical terms, the Weidmüller BLF 5.08HC/13/90F SN OR BX PCB connector can support custom signal groupings, control channels with spare lines, or mixed-function terminations where the pole count is driven by the exact circuit logic rather than by arbitrary standardization.
That makes it attractive for tailored electronics designs in machine building, HVAC controls, test systems, and industrial instrumentation. When a board has a fixed number of channels or a dedicated signal grouping, using the correct pole count can keep the final product tidy and easier to document.
Handling and Installation Benefits
One of the strongest points of this connector family is usability. PUSH IN technology is widely appreciated because it reduces wiring effort and supports efficient assembly. The actuator helps during conductor release, which becomes especially important in commissioning and service scenarios. Technicians working in narrow cabinets or on populated boards benefit from connection systems that do not turn routine work into a slow, delicate operation.
The right-angle orientation adds another practical advantage. It allows conductors to leave the board in a controlled horizontal path, which often simplifies harness routing and makes better use of enclosure volume. That is one reason many engineers specifically search for a Weidmüller 13-pole 90-degree PCB connector instead of a vertical alternative.
Selection Logic for Industrial Projects
Choosing the Weidmüller BLF 5.08HC/13/90F SN OR BX 1002200000 makes sense when the design team needs a pluggable female connector with a specific pole count, industrial-grade ratings, and service-friendly wiring. It is worth verifying mating header compatibility, planned conductor sizes, voltage and current margins, and cabinet routing direction before final selection. Once those points are aligned, this connector can contribute to a clean, maintainable, and professional board interface concept.
FAQ
What is the main benefit of the Weidmüller BLF 5.08HC/13/90F SN OR BX?
The main benefit is balance. It offers a compact but capable 13-pole interface, a widely used 5.08 mm pitch, and PUSH IN wiring with actuator support. For many industrial board designs, that combination improves both assembly efficiency and long-term service handling.
Is this connector suitable for control panels and machine electronics?
Yes, that is one of the most typical use areas. It is well suited to PCB-based control systems, signal distribution boards, machine modules, and instrumentation assemblies where pluggable field wiring is preferred.
Why would someone choose 13 poles instead of 12 or 14?
Because the project may genuinely need 13 active circuits. Using the correct pole count avoids wasted positions, keeps the layout disciplined, and can make wiring documentation easier to understand. In engineered systems, small improvements like that can save time later.
Does the 90-degree format change how the connector is used?
Yes. A right-angle design changes conductor exit direction and can improve space usage inside the housing. It is especially helpful where vertical clearance is limited or where cable routing needs to stay parallel to the PCB.
Where can I find more information on the brand and related ranges?
For more information, visit Weidmüller. It is a helpful reference point for exploring related connector families and industrial connectivity solutions.